Important Safety Instructions

		SAVFTHESF INSTRUCTIONs *
-I = I	IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS
	:NJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING
	INSTRUCTIONS BEFORE USING THIS EQUIPMENT.		I
HAZARD		WHAT CAN HAPPEN	HOW TO PREVENT IT

RISK OF BURSTING

4ir Tank

mTHE FOLLOWING CONDITIONS COULD lead to a weakening of the tank,nd RESULT I N A VIOLENT TANK EXPLOSION:

1. FAILURE TO PROPERLY DRAIN		0	DRAIN TANK DAILY OR AFTER EACH
condensed WATER FROM THE			-USE. If tank develops a leak, replace it
TANK, causina rust and thinning			immediately with a new tank or new
of the tank steel.			compressor outfit.
2. MODIFICATIONS or attempted			NEVER drill into, weld, or MAKE ANY
repairs TO THE TANK.			MODIFICATIONS TO THE TANK or its
			attachments. Never attempt to repair a
			damaged or leaking tank. Replace with a
			new tank
		1 The tank is designed to withstand
			specific operating pressures. NEVER
			MAKE ADJUSTMENTS OR P		m
			SUBSTITUTIONS TO alter the
			FACTORY SET operating PRESSURES.
Attachments and Accessories			-FOR essential CONTROL OF. AIR
EXCEEDING THE PRESSURE RATING		m	-FOR essential CONTROL OF. AIR
OF AIR TOOLS, spray guns, air operated			PRESSURE, you must INSTALL A
accessories, tires	other		PRESSURE REGULATOR .AND
INFLATABLES CAN CAUSE THEM TO			REGULATED AIR PRESSURE GAUGE to
EXPLODE or fly apart, and could result			the air outlet of your compressor.
in serious injury.			Follow the equipment manufacturers
			recommendation and never exceed the
			maximum allowable pressure rating of
			attachments. NEVER USE THE
			COMPRESSOR TO INFLATE SMALL
			LOW-PRESSURE OBJECTS SUCH AS
			CHILDREN’S TOYS. FOOTBALLS,
			BASKETBALLS. ETC.	i

RISK OF ELECTRIC

SHOCK

RISK OF EXPLOSlOh

OR FIRE

Your AIR COMPRESSOR is powered b) electricity. Like anv other electricallv

powered-device,-&it is NOT USED PROPERLY it MAY CAUSE ELECTRICAL SHOCK.

ELECTRICAL GROUNDING: FAILURE TO PROVIDE ADEQUATE GROUND- ING TO THIS PRODUCT CQULD RESULT IN SERIOUS INJURY OR DEATH FROM ELECTROCUTION. SEE GROUNDING INSTRUCTIONS IF APPLICABLE.

It is normal for ELECTRICAL CONTACTS within the motor and pressure switch to SPARK WHENEVER

THE COMPRESSOR STARTS OR STOPS.

Any ELECTRICAL WIRING OR REPAIRS required to this product

SHOULD BE PERFORMED BY QUALIFIED SERVICE PERSONNEL OR a LICENSED ELECTRICIAN, in

accordance with national and local electrical codes.

MAKE CERTAIN that the ELECTRICAL

CIRCUIT to which the compressor is connected PROVIDES PROPER ELECTRICAL GR0UNDING. CORRECT VOLTAGE, AND ADEQUATE FUSE

~~~PROTECTI0N .

Never operate the compressor outdoors when it is raining.

Always OPERATE the COMPRESSOR a well ventilated AREA FREE OF GASOLINE OR SOLVENT VAPORS.

If spraying flammable materials, LOCATE

COMPRESSOR at least 20 FEET AWAY FROM SPRAY AREA.

STORE FLAMMABLE MATERIALS in a secure location AWAY FROM COMPRESSOR.