Skil 1827, 1830, 1817 manual Collet Chuck Care, Collet Chuck Assembly

Page 10

SM 1619X04663 05-11:SM 1619X04663 05-11 5/3/11 8:14 AM Page 10

COLLET CHUCK CARE

All router models are designed to accept 1/2" and 1/4" shank bits. 1/4" shank bits require a 1/4" adapter sleeve. With the router bit removed, continue to turn the collet nut counter- clockwise until it is loose. To assure a firm grip, occasionally blow out the collet chuck and clean with a tissue or fine brush. The collet chuck assembly is made up of two component parts as illustrated (Fig. 6); check to see that the adapter sleeve, if needed, is properly seated in the collet nut and lightly thread the collet nut back onto the 1/2" collet chuck. Replace a worn or damaged collet chuck assembly immediately.

COLLET CHUCK ASSEMBLY

FIG. 6

1/2" COLLET

CHUCK

 

COLLET

 

NUT

 

 

1/4" ADAPTER

 

SLEEVE

REMOVING MOTOR FROM BASE To remove motor from fixed base:

1.Hold router in vertical position.

2.Open base clamp lever.

3.Push base release button in direction of arrow and pull motor unit upwards from base. Just before the motor is completely out of the base, it will stop moving.

4.Depress the collet lock to fully disengage the motor unit from the base (Fig. 7).

To remove motor from plunge base:

1.Hold router in vertical position.

2.Open base clamp lever, and pull motor unit upwards from base. Just before the motor is completely out of the base, it will stop moving.

3.Depress the collet lock to fully disengage the motor unit from the base (Fig. 8).

INSTALLING MOTOR INTO BASE To install motor into fixed base:

1.Release the base clamp lever.

2.Depress collet lock on motor unit.

3.Align the fine adjust rack with the fine adjust knob.

4.Depress base release button and slide motor unit until the top of fine adjust rack is level with the top of base.

5.Lock the base clamp lever.

To install motor into plunge base:

1.Release the base clamp lever.

2.Depress collet lock on motor unit.

3.Align the fine adjust rack with the slot on the back of the plunge base.

4.Slide motor unit into base until fully seated.

5.Lock the base clamp lever.

FIG. 7

MOTOR

UNIT

COLLET

LOCK

FIXED

BASE

BASE RELEASE

BUTTON

FIG. 8

MOTOR

UNIT

COLLET

LOCK

BASE

CLAMP

LEVER

FINE ADJUST RACK

BASE CLAMP

LEVER

FINE ADJUST

RACK

PLUNGE BASE

-10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Call Toll Free for Leer antes de usarSee Voir Ver la página Electrical safety General Power Tool Safety WarningsWork area safety Personal safetySafety Rules for Routers ServiceAdditional Safety Warnings Symbols Symbol Name Designation/ExplanationUL Standard Conforms toCertified to CAN/CSA Standard C22.2 NoDisconnect the plug from the power source before making any Functional Description and SpecificationsFix Base Router Model 1827 & 1830 only Fine Adjustment Variable Speed DialPlunge Base Router Base Clamp Lever Collet Lock SUB-BASERemoving the Router BIT AssemblyInstalling a Router BIT Shank Collet Lock Collet NUT Base WrenchCollet Chuck Assembly Collet Chuck CareDepth Adjustment with Fixed Base Fine Adjustment Knob InstallingTemplate Guide Adapter Not included, available as accessory Operating InstructionsFine Adjustment Knob Indicator Ring Depth Scale Depth Adjustment with Plunge Base Plunging ActionDepth ROD and Turret SITE-LIGHT Dial Setting RPM ApplicationElectronic Variable Speed Control Feeding the RouterAttaching Guide Guiding the RouterBoard Guide Securely Clamp Work BaseRouter Not included, available as accessoryTemplate Guides Collet NUT Template Router Guide SUB-BASE Pattern OffsetMaintenance Cleaning AccessoriesExtension Cords Problem Trouble Tool will not Start Trouble ShootingTrouble Tool does not Come UP to Speed Sécurité du lieu de travail Sécurité électriqueUtilisation et entretien des outils Électroportatifs Règles de sécurité concernant les toupiesEntretien Avertissements supplémentaires concernant la sécurité Loutil, causant éventuellement un bris de la lameSymboles Symbole Nom Désignation/ExplicationCertifié conforme à Symboles suiteConforme à Norme ULDéfonceuse à embase fixe Description fonctionnelle et spécificationsEmbase DE Type a Poignée Embase DE Type B Levier DE Serrage DE L’EMBASE Position Slide ON/OFF Switch Poignée Index DE ProfondeurDéfonceuse à embase plongeante LA DouilleDémontage DU FER DE Défonceuse Installation D’UN FER DE DéfonceuseAssemblage Queue Blocage DE LA Douille Écrou DE Douille Embase CLÉEnsemble DE MANDRIN-DOUILLE Entretien DU MANDRIN-DOUILLEÉcrou DE LA Douille Déflecteur Copeaux Instructions d’utilisationDéflecteur À Copeaux DE Réglage FIN DE L’EMBASE Fixe’ACTION DE Plongée DE Plongéede L’EMBASE PlongeanteTige DE Profondeur ET Tourelle Application Commande Électronique DEDepart EN Douceur Éclairage SITE-LIGHTFixation DU Guide Guidage DE LA DéfonceusePlanche DE Guidage Bridez Fermement LA Planche Pièce EmbaseGuides DE Gabarit Fers Guidés PAR Roulement OU PAR PiloteEntretien Cordons de rallonge AccessoiresNettoyage Problème L’OUTIL NE Démarre PAS Guide de diagnosticSolutions Problème L’OUTIL NE Tourne PAS À UNE Vitesse SuffisanteSeguridad eléctrica Seguridad del área de trabajoSeguridad personal Mecánicas Normas de seguridad para fresadorasServicio de ajustes y reparaciones Advertencias de seguridad adicionales Símbolos Símbolo Nombre Designación/explicaciónCertificado conforme a las Siguientes normas Símbolos continuaciónCumple con las siguientes Normas Estándar ULDescripción funcional y especificaciones Fresadora de base fijaFresadora de descenso vertical Pomo DE Ajuste FinoBroca DE 1/4 Cuerpo EnsamblajeRemoción DE LA Broca DE Fresadora Llave DE TuercaCierre DEL Portaherramienta Base Fija Conjunto DE Mandril PortaherramientaDescenso Vertical Palanca Fijación DE LA Base Deflector DE Virutas Instrucciones de funcionamientoInstalación DEL Está diseñado para utilizarse como protector de seguridadVarilla DE Profundidad Y Torreta DE Palanca DE Fijación DE LA ProfundidadProfundidad DE Penetración Pomo DEAplicación Apagado DE 2 PosicionesDispositivo DE Arranque Suave DEL DialCorte Guiado DE LA FresadoraColocación DE LA Guía AnchuraParte Brocas CON Punta Piloto Y CON Guía DE CojineteCorte EL Piloto SE Desliza PlantillasMantenimiento ServicioLimpieza Cordones de extensiónAccesorios Para EvitarRemedio Resolución de problemasAvería LA Herramienta no Arranca Avería LA Herramienta no Alcanza Toda SU VelocidadSM 1619X04663 05-11SM 1619X04663 05-11 5/3/11 815 AM Remarques Notas 1619X04663

1827, 1817, 1830 specifications

Skil is a renowned brand in the power tool industry, offering a range of products that cater to the needs of both professionals and DIY enthusiasts. Among its impressive lineup, the Skil 1830, 1817, and 1827 models stand out for their unique features and versatile capabilities, making them essential tools for a variety of applications.

The Skil 1830 is a highly efficient reciprocating saw designed for both heavy-duty tasks and intricate cutting jobs. One of its standout features is the Variable Speed Control, which allows users to adjust the speed according to the material being cut. This feature ensures maximum precision and control, whether working with wood, metal, or plastic. The 1830 also comes equipped with a tool-less blade change system, making it easy to switch blades quickly and efficiently. Its powerful motor ensures optimal performance, while the ergonomic handle provides comfort during extended use.

On the other hand, the Skil 1817 is a versatile circular saw that is perfect for both beginners and seasoned pros. Its powerful 15-amp motor delivers impressive cutting performance, enabling users to easily tackle a variety of materials. One of the most notable aspects of the 1817 is its laser guide system, which enhances accuracy and precision when making straight cuts. Additionally, the integrated dust blower keeps the cutting line clear for improved visibility, while the lightweight design of the saw allows for easy maneuverability without sacrificing power.

Lastly, the Skil 1827 is a robust and reliable jigsaw that excels in making curved and intricate cuts. Its orbital cut option allows users to switch between a pendulum action for fast cuts and a straight cut for finer details. The 1827 features a variable speed dial that can be adjusted based on the material, ensuring optimal performance for every job. An integrated blower keeps the cutting line free of debris, enhancing visibility and accuracy. Its ergonomic grip ensures comfort during extended use, and the tool-less blade change feature allows for quick and easy blade swaps.

In summary, the Skil 1830, 1817, and 1827 power tools offer a range of features and technologies that cater to various cutting needs. From the adjustable speed and tool-less blade changes of the 1830 to the laser guide of the 1817 and the orbital cutting options of the 1827, each model is designed with the user in mind, ensuring ease of use, comfort, and precision. Whether working on a professional project or a home improvement task, these Skil tools provide the reliability and performance needed to achieve excellent results.
Top Page Image Contents