Skil 1830, 1827, 1817 manual Safety Rules for Routers, Service

Page 3

SM 1619X04663 05-11:SM 1619X04663 05-11 5/3/11 8:14 AM Page 3

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Rules for Routers

Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

Always make sure the work surface is free from nails and other foreign objects. Cutting into a nail can cause the bit and the tool to jump and damage the bit.

Never hold the workpiece in one hand and the tool in the other hand when in use. Never place hands near or below cutting surface. Clamping the material and guiding the tool with both hands is safer.

Never lay workpiece on top of hard

surfaces, like concrete, stone, etc...

Protruding cutting bit may cause tool to jump.

Always wear safety goggles and dust mask. Use only in well ventilated area. Using personal safety devices and working in safe environment reduces risk of injury.

After changing the bits or making any adjustments, make sure the collet nut and any other adjustment devices are securely tightened. Loose adjustment device can unexpectedly shift, causing loss of control, loose rotating components will be violently thrown.

Never start the tool when the bit is engaged in the material. The bit cutting edge may grab the material causing loss of control of the cutter.

Always hold the tool with two hands during start-up. The reaction torque of the motor can cause the tool to twist.

The direction of feeding the bit into the material is very important and it relates to the direction of bit rotation. When viewing the tool from the top, the bit rotates clockwise. Feed direction of cutting must be counter-clockwise. NOTE: inside and outside cuts will require different feed direction, refer to section on feeding the router. Feeding the tool in the wrong direction, causes the cutting edge of the bit to climb out of the work and pull the tool in the direction of this feed.

Never use dull or damaged bits. Sharp bits must be handled with care. Damaged

-3-

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Leer antes de usar Call Toll Free forSee Voir Ver la página Personal safety General Power Tool Safety WarningsWork area safety Electrical safetyService Safety Rules for RoutersAdditional Safety Warnings Symbol Name Designation/Explanation SymbolsCAN/CSA Standard C22.2 No Conforms toCertified to UL StandardFunctional Description and Specifications Disconnect the plug from the power source before making anyFix Base Router Base Clamp Lever Collet Lock SUB-BASE Fine Adjustment Variable Speed DialPlunge Base Router Model 1827 & 1830 onlyShank Collet Lock Collet NUT Base Wrench AssemblyInstalling a Router BIT Removing the Router BITCollet Chuck Care Collet Chuck AssemblyOperating Instructions InstallingTemplate Guide Adapter Not included, available as accessory Depth Adjustment with Fixed Base Fine Adjustment KnobDepth Adjustment with Plunge Base Plunging Action Fine Adjustment Knob Indicator Ring Depth ScaleDepth ROD and Turret Feeding the Router Dial Setting RPM ApplicationElectronic Variable Speed Control SITE-LIGHTWork Base Guiding the RouterBoard Guide Securely Clamp Attaching GuideCollet NUT Template Router Guide SUB-BASE Pattern Offset Not included, available as accessoryTemplate Guides RouterMaintenance Accessories CleaningExtension Cords Trouble Shooting Problem Trouble Tool will not StartTrouble Tool does not Come UP to Speed Sécurité électrique Sécurité du lieu de travailRègles de sécurité concernant les toupies Utilisation et entretien des outils ÉlectroportatifsEntretien Loutil, causant éventuellement un bris de la lame Avertissements supplémentaires concernant la sécuritéSymbole Nom Désignation/Explication SymbolesNorme UL Symboles suiteConforme à Certifié conforme àDescription fonctionnelle et spécifications Défonceuse à embase fixeEmbase DE Type a LA Douille Position Slide ON/OFF Switch Poignée Index DE ProfondeurDéfonceuse à embase plongeante Poignée Embase DE Type B Levier DE Serrage DE L’EMBASEQueue Blocage DE LA Douille Écrou DE Douille Embase CLÉ Installation D’UN FER DE DéfonceuseAssemblage Démontage DU FER DE DéfonceuseEntretien DU MANDRIN-DOUILLE Ensemble DE MANDRIN-DOUILLEÉcrou DE LA Douille DE Réglage FIN DE L’EMBASE Fixe Instructions d’utilisationDéflecteur À Copeaux Déflecteur CopeauxDE Plongéede L’EMBASE Plongeante ’ACTION DE PlongéeTige DE Profondeur ET Tourelle Éclairage SITE-LIGHT Commande Électronique DEDepart EN Douceur ApplicationPièce Embase Guidage DE LA DéfonceusePlanche DE Guidage Bridez Fermement LA Planche Fixation DU GuideFers Guidés PAR Roulement OU PAR Pilote Guides DE GabaritEntretien Accessoires Cordons de rallongeNettoyage Problème L’OUTIL NE Tourne PAS À UNE Vitesse Suffisante Guide de diagnosticSolutions Problème L’OUTIL NE Démarre PASSeguridad del área de trabajo Seguridad eléctricaSeguridad personal Normas de seguridad para fresadoras MecánicasServicio de ajustes y reparaciones Advertencias de seguridad adicionales Símbolo Nombre Designación/explicación SímbolosEstándar UL Símbolos continuaciónCumple con las siguientes Normas Certificado conforme a las Siguientes normasFresadora de base fija Descripción funcional y especificacionesPomo DE Ajuste Fino Fresadora de descenso verticalLlave DE Tuerca EnsamblajeRemoción DE LA Broca DE Fresadora Broca DE 1/4 CuerpoConjunto DE Mandril Portaherramienta Cierre DEL Portaherramienta Base FijaDescenso Vertical Palanca Fijación DE LA Base Está diseñado para utilizarse como protector de seguridad Instrucciones de funcionamientoInstalación DEL Deflector DE VirutasPomo DE Palanca DE Fijación DE LA ProfundidadProfundidad DE Penetración Varilla DE Profundidad Y Torreta DEDEL Dial Apagado DE 2 PosicionesDispositivo DE Arranque Suave AplicaciónAnchura Guiado DE LA FresadoraColocación DE LA Guía CortePlantillas Brocas CON Punta Piloto Y CON Guía DE CojineteCorte EL Piloto SE Desliza ParteServicio MantenimientoPara Evitar Cordones de extensiónAccesorios LimpiezaAvería LA Herramienta no Alcanza Toda SU Velocidad Resolución de problemasAvería LA Herramienta no Arranca RemedioSM 1619X04663 05-11SM 1619X04663 05-11 5/3/11 815 AM Remarques Notas 1619X04663

1827, 1817, 1830 specifications

Skil is a renowned brand in the power tool industry, offering a range of products that cater to the needs of both professionals and DIY enthusiasts. Among its impressive lineup, the Skil 1830, 1817, and 1827 models stand out for their unique features and versatile capabilities, making them essential tools for a variety of applications.

The Skil 1830 is a highly efficient reciprocating saw designed for both heavy-duty tasks and intricate cutting jobs. One of its standout features is the Variable Speed Control, which allows users to adjust the speed according to the material being cut. This feature ensures maximum precision and control, whether working with wood, metal, or plastic. The 1830 also comes equipped with a tool-less blade change system, making it easy to switch blades quickly and efficiently. Its powerful motor ensures optimal performance, while the ergonomic handle provides comfort during extended use.

On the other hand, the Skil 1817 is a versatile circular saw that is perfect for both beginners and seasoned pros. Its powerful 15-amp motor delivers impressive cutting performance, enabling users to easily tackle a variety of materials. One of the most notable aspects of the 1817 is its laser guide system, which enhances accuracy and precision when making straight cuts. Additionally, the integrated dust blower keeps the cutting line clear for improved visibility, while the lightweight design of the saw allows for easy maneuverability without sacrificing power.

Lastly, the Skil 1827 is a robust and reliable jigsaw that excels in making curved and intricate cuts. Its orbital cut option allows users to switch between a pendulum action for fast cuts and a straight cut for finer details. The 1827 features a variable speed dial that can be adjusted based on the material, ensuring optimal performance for every job. An integrated blower keeps the cutting line free of debris, enhancing visibility and accuracy. Its ergonomic grip ensures comfort during extended use, and the tool-less blade change feature allows for quick and easy blade swaps.

In summary, the Skil 1830, 1817, and 1827 power tools offer a range of features and technologies that cater to various cutting needs. From the adjustable speed and tool-less blade changes of the 1830 to the laser guide of the 1817 and the orbital cutting options of the 1827, each model is designed with the user in mind, ensuring ease of use, comfort, and precision. Whether working on a professional project or a home improvement task, these Skil tools provide the reliability and performance needed to achieve excellent results.
Top Page Image Contents