SM 1619X01949
CHARGING BATTERY PACK
Your charger was designed so the battery pack can be charged in, or out of the tool.
Plug charger cord into your standard power outlet.
Place the battery pack onto the front of charger as shown in Figure. 5, then press down at rear end of battery pack.
The charger’s green indicator will
begin to “BLINK”. This indicates that the battery is receiving a fast charge.
when the battery pack is fully charged (Fig. 6).
When the indicator light
stops “BLINKING” (and becomes a steady green
light) fast charging is complete.
When the battery pack is not inserted into the charger, a steady green light also indicates that the charger is plugged in and is ready for operation.
When you begin the charging process of the battery pack, a steady green light could also mean the battery pack is too hot or too cold.
The purpose of the light is to indicate that the battery pack is
When the battery pack is fully charged, unplug the charger (unless you're charging another battery pack) remove battery pack from charger and slip the battery pack back into the tool handle.
BATTERY PACK | FIG. 5 |
CHARGER |
|
2 | 3 |
1 |
|
FIG. 6
BATTERY RELEASE |
|
BUTTON | BATTERY PACK |
| IN TOOL |
BATTERY | ! WARNING | Do not use tool | |
PACK | |||
while charging. |