Skil 2510 Battery/Charger, Battery Care, Nails, screws, keys, etc. Fire or injury may result

Page 5

SM 1619X01949 06-07 6/29/07 12:20 PM Page 5

Battery/Charger

Before using battery charger, read all instructions and cautionary markings on

(1)battery charger, (2) battery pack, and (3) product using battery.

Use only the charger which accompanied your product or direct replacement as listed in the catalog or this manual. Do not substitute any other charger. Use only Skil approved chargers with your product. See Functional Description and Specifications.

Do not disassemble charger or operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Replace damaged cord or plugs immediately. Incorrect reassembly or damage may result in electric shock or fire.

Do not recharge battery in damp or wet environment. Do not expose charger to rain or snow. If battery case is cracked or otherwise damaged, do not insert into charger. Battery short or fire may result.

Charge only Skil approved rechargeable batteries. See Functional Description and Specifications. Other types of batteries may burst causing personal injury and damage.

Charge battery pack in temperatures above +40 degrees F (4 degrees C) and below

+105 degrees F (41 degrees C). Store tool and battery pack in locations where temperatures will not exceed 120 degrees F (49 degrees C). This is important to prevent serious damage to the battery cells.

Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes. The battery liquid is caustic and could cause chemical burns to tissues. If liquid comes in contact with skin, wash quickly with soap and water. If the liquid contacts your eyes, flush them with water for a minimum of 10 minutes and seek medical attention.

Place charger on flat non-flammable surfaces and away from flammable materials when re-charging battery pack. The charger and battery pack heat during charging. Carpeting and other heat insulating surfaces block proper air circulation which may cause overheating of the charger and battery pack. If smoke or melting of the case are observed unplug the charger immediately and do not use the battery pack or charger.

Use of an attachment not recom- mended or sold by Skil may result in a risk of fire, electric shock or injury to persons.

Battery Care

!WARNING When batteries are not in tool or charger, keep them

away from metal objects. For example, to protect terminals from shorting, DO NOT place batteries in a tool box or pocket with

nails, screws, keys, etc. Fire or injury may result.

DO NOT PUT BATTERIES INTO FIRE OR EXPOSE TO HIGH HEAT. They may explode.

-5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents See Voir Ver la página Read Before UsingFor English Version Version française Work area safety General Safety RulesElectrical safety Personal safetyBattery tool use and care Power tool use and careService Power tools are dangerous in the hands of untrained usersExposure to noise can cause hearing loss Safety Rules for Cordless Drills/DriversNails, screws, keys, etc. Fire or injury may result Battery/ChargerBattery Care LITHIUM-ION Batteries Battery DisposalSymbols Not Available on ALL Models Functional Description and SpecificationsLithium Ion Cordless Drill/Drivers Operating Instructions Releasing and Inserting Battery Pack from Tool Installing ChuckInserting Bits Removing ChuckCharger Indicator Light Charging Battery PackDo not use tool While chargingOperating Tips Maintenance Certain cleaning agents Caution and solvents damage AccessoriesCleaning Sécurité du lieu de travail Consignes générales de sécuritéSécurité électrique Sécurité personnelleEntretien Utilisation et entretien des outils ÉlectroportatifsUtilisation et entretien des outils à piles Le plomb provenant des peintures à base de plomb Consignes de sécurité pour perceuses/tournevis sans filPas dans l’outil ou le Chargeur de pileEntretien des piles Ne tentez pas de Mise au rebut des pilesPiles LITHIUM-ION Robert Bosch Tool Corporation participe volontairementSymboles Description fonctionnelle et spécifications Éclairage ’APPOINT Powerlight BLOC-PILESPerceuses/visseuses sans fil à piles au lithium-ion NON Disponible SUR Tous LES ModèlesConsignes de fonctionnement Retrait DU Mandrin Insertion DES ForetsSens Horaire ANTI-HORAIRE Pose DU Mandrin Retrait ET Insertion DU BLOC-PILES Dans LoutilBLOC-PILES Chargeur Chargement DU BLOC-PILESQuil est en charge Chargeur Témon LumineuxConsignes de fonctionnement Entretien Nettoyage AccessoiresCertains Agents Et certainsSeguridad del área de trabajo Normas generales de seguridadSeguridad eléctrica Seguridad personalServicio de ajustes y reparaciones MecánicasUso y cuidado de las herramientas Alimentadas por baterías SM 1619X01949 06-07 6/29/07 1220 PM Cuidado de las baterías Batería/cargadorBaterías DE Iones DE Litio Eliminación de las bateríasDe Li-ion SímbolosCon aislamiento doble Descripción funcional y especificaciones LUZ Powerlight Paquete DE Baterías LUZ IndicadoraNo Disponible EN Todos LOS Modelos Paquete de bateriasInstrucciones de funcionamiento Desmontaje DEL Mandril Colocacion DE LAS BrocasSentido DE LAS Agujas DEL Reloj Contrario AL Instalacion DEL MandrilNo use la herramienta Carga DEL Paquete DE BateríasEl paquete de baterías Cargador LUZ IndicadoraConsejos de funcionamiento Servicio MantenimientoLimpieza AccesoriosCordones de extensión Para evitarSM 1619X01949 06-07 6/29/07 1220 PM Remarques Notas SM 1619X01949 06-07 6/29/07 1220 PM

2510 specifications

The Skil 2510, a versatile and powerful tool, is designed to meet the demands of both amateur DIY enthusiasts and seasoned professionals. Known for its high performance and practical features, the Skil 2510 is a go-to choice for those in need of a reliable and efficient solution for various woodworking tasks.

A standout feature of the Skil 2510 is its robust 7.0-amp motor, which delivers ample power to handle a wide range of cutting applications. This motor ensures that project execution is smooth and efficient, whether cutting through hardwood, softwood, or laminate. Its capability to make quick and precise cuts contributes to improved productivity and exceptional results.

The Skil 2510 comes equipped with a variable speed control feature, allowing users to adjust the cutting speed according to the material being used. This flexibility is crucial in achieving optimal results, as different materials require different speeds for effective cutting. The tool's speed ranges from 3,000 to 3,800 RPM, making it suitable for both intricate cuts and rapid material removal.

Another significant aspect of the Skil 2510 is its cutting capacity. The saw features a 10-inch blade that can tackle a variety of cutting angles and bevels. The bevel capability reaches up to 45 degrees, enabling users to create precise miter cuts. This feature is particularly beneficial for projects that require refined edges and intricate details.

Safety is always a concern when operating power tools, and the Skil 2510 addresses this with various safety features. The integrated blade guard protects users from accidental injuries while the saw is in operation. Additionally, the electric brake technology stops the blade quickly after the trigger is released, minimizing the risk of accidents.

The design of the Skil 2510 also prioritizes user comfort and ease of use. The lightweight construction allows for easy maneuverability during extended use, reducing user fatigue. The ergonomic handle ensures a firm grip, promoting better control and accuracy while cutting.

Incorporating innovative technologies and features, the Skil 2510 stands out as a powerful and versatile solution for woodworking projects. With its combination of performance, safety, and user-friendly design, this tool is an excellent addition to any workshop, making it easier for users to achieve professional-grade results.
Top Page Image Contents