Skil 2510 manual Power tool use and care, Battery tool use and care, Service

Page 3

SM 1619X01949 06-07 6/29/07 12:20 PM Page 3

Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely control the power tool.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Battery tool use and care

Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into power tools that have the switch on invites accidents.

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful not to disassemble any portion of the tool since internal wires may be misplaced or pinched or safety guard return springs may be improperly mounted. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts.

SAVE THESE INSTRUCTIONS

-3-

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Read Before Using For English Version Version françaiseSee Voir Ver la página Personal safety General Safety RulesWork area safety Electrical safetyPower tools are dangerous in the hands of untrained users Power tool use and careBattery tool use and care ServiceExposure to noise can cause hearing loss Safety Rules for Cordless Drills/DriversBattery/Charger Battery CareNails, screws, keys, etc. Fire or injury may result LITHIUM-ION Batteries Battery DisposalSymbols Functional Description and Specifications Lithium Ion Cordless Drill/DriversNot Available on ALL Models Operating Instructions Removing Chuck Installing ChuckReleasing and Inserting Battery Pack from Tool Inserting BitsWhile charging Charging Battery PackCharger Indicator Light Do not use toolOperating Tips Maintenance Accessories CleaningCertain cleaning agents Caution and solvents damage Sécurité personnelle Consignes générales de sécuritéSécurité du lieu de travail Sécurité électriqueUtilisation et entretien des outils Électroportatifs Utilisation et entretien des outils à pilesEntretien Le plomb provenant des peintures à base de plomb Consignes de sécurité pour perceuses/tournevis sans filChargeur de pile Entretien des pilesPas dans l’outil ou le Robert Bosch Tool Corporation participe volontairement Mise au rebut des pilesNe tentez pas de Piles LITHIUM-IONSymboles NON Disponible SUR Tous LES Modèles Éclairage ’APPOINT Powerlight BLOC-PILESDescription fonctionnelle et spécifications Perceuses/visseuses sans fil à piles au lithium-ionConsignes de fonctionnement Retrait ET Insertion DU BLOC-PILES Dans Loutil Insertion DES ForetsRetrait DU Mandrin Sens Horaire ANTI-HORAIRE Pose DU MandrinChargeur Témon Lumineux Chargement DU BLOC-PILESBLOC-PILES Chargeur Quil est en chargeConsignes de fonctionnement Entretien Et certains AccessoiresNettoyage Certains AgentsSeguridad personal Normas generales de seguridadSeguridad del área de trabajo Seguridad eléctricaMecánicas Uso y cuidado de las herramientas Alimentadas por bateríasServicio de ajustes y reparaciones SM 1619X01949 06-07 6/29/07 1220 PM Cuidado de las baterías Batería/cargadorBaterías DE Iones DE Litio Eliminación de las bateríasSímbolos Con aislamiento dobleDe Li-ion Paquete de baterias LUZ Powerlight Paquete DE Baterías LUZ IndicadoraDescripción funcional y especificaciones No Disponible EN Todos LOS ModelosInstrucciones de funcionamiento Instalacion DEL Mandril Colocacion DE LAS BrocasDesmontaje DEL Mandril Sentido DE LAS Agujas DEL Reloj Contrario ALCargador LUZ Indicadora Carga DEL Paquete DE BateríasNo use la herramienta El paquete de bateríasConsejos de funcionamiento Servicio MantenimientoPara evitar AccesoriosLimpieza Cordones de extensiónSM 1619X01949 06-07 6/29/07 1220 PM Remarques Notas SM 1619X01949 06-07 6/29/07 1220 PM

2510 specifications

The Skil 2510, a versatile and powerful tool, is designed to meet the demands of both amateur DIY enthusiasts and seasoned professionals. Known for its high performance and practical features, the Skil 2510 is a go-to choice for those in need of a reliable and efficient solution for various woodworking tasks.

A standout feature of the Skil 2510 is its robust 7.0-amp motor, which delivers ample power to handle a wide range of cutting applications. This motor ensures that project execution is smooth and efficient, whether cutting through hardwood, softwood, or laminate. Its capability to make quick and precise cuts contributes to improved productivity and exceptional results.

The Skil 2510 comes equipped with a variable speed control feature, allowing users to adjust the cutting speed according to the material being used. This flexibility is crucial in achieving optimal results, as different materials require different speeds for effective cutting. The tool's speed ranges from 3,000 to 3,800 RPM, making it suitable for both intricate cuts and rapid material removal.

Another significant aspect of the Skil 2510 is its cutting capacity. The saw features a 10-inch blade that can tackle a variety of cutting angles and bevels. The bevel capability reaches up to 45 degrees, enabling users to create precise miter cuts. This feature is particularly beneficial for projects that require refined edges and intricate details.

Safety is always a concern when operating power tools, and the Skil 2510 addresses this with various safety features. The integrated blade guard protects users from accidental injuries while the saw is in operation. Additionally, the electric brake technology stops the blade quickly after the trigger is released, minimizing the risk of accidents.

The design of the Skil 2510 also prioritizes user comfort and ease of use. The lightweight construction allows for easy maneuverability during extended use, reducing user fatigue. The ergonomic handle ensures a firm grip, promoting better control and accuracy while cutting.

Incorporating innovative technologies and features, the Skil 2510 stands out as a powerful and versatile solution for woodworking projects. With its combination of performance, safety, and user-friendly design, this tool is an excellent addition to any workshop, making it easier for users to achieve professional-grade results.
Top Page Image Contents