Hitachi SJ700-2 Series service manual Term inal C111

					Default
	Code	Function name	Monitored data or setting					Note
				_FF		_FEF	_FUF
Term inal	C111	Overload setting (2)	0.0 to 2.00 x "rated current" (A)	Rated current of
					inverter
Adjust ment	C121	[O] input zero calibration	0. to 9999., 1000 to 6553 (10000 to 65530)	Factory setting
	C122	[OI] input zero calibration	0. to 9999., 1000 to 6553 (10000 to 65530)	Factory setting
	C123	[O2] input zero calibration	0. to 9999., 1000 to 6553 (10000 to 65530)	Factory setting
	C130	Output 11 on-delay time	0.0 to 100.0 (s)		0.0
	C131	Output 11 off-delay time	0.0 to 100.0 (s)		0.0
	C132	Output 12 on-delay time	0.0 to 100.0 (s)		0.0
	C133	Output 12 off-delay time	0.0 to 100.0 (s)		0.0
	C134	Output 13 on-delay time	0.0 to 100.0 (s)		0.0
	C135	Output 13 off-delay time	0.0 to 100.0 (s)		0.0
	C136	Output 14 on-delay time	0.0 to 100.0 (s)		0.0
	C137	Output 14 off-delay time	0.0 to 100.0 (s)		0.0
	C138	Output 15 on-delay time	0.0 to 100.0 (s)		0.0
	C139	Output 15 off-delay time	0.0 to 100.0 (s)		0.0
	C140	Output RY on-delay time	0.0 to 100.0 (s)		0.0
	C141	Output RY off-delay time	0.0 to 100.0 (s)		0.0
function	C142	Logical output signal 1 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C143	Logical output signal 1 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C144	Logical output signal 1 operator	00 (AND), 01 (OR), 02 (XOR)		00
operation
		selection
	C145	Logical output signal 2 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C146	Logical output signal 2 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
terminal
	C147	Logical output signal 2 operator	00 (AND), 01 (OR), 02 (XOR)		00
		selection
Output	C148	Logical output signal 3 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C149	Logical output signal 3 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C150	Logical output signal 3 operator	00 (AND), 01 (OR), 02 (XOR)		00
		selection
	C151	Logical output signal 4 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C152	Logical output signal 4 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C153	Logical output signal 4 operator	00 (AND), 01 (OR), 02 (XOR)		00
		selection
	C154	Logical output signal 5 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C155	Logical output signal 5 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C156	Logical output signal 5 operator	00 (AND), 01 (OR), 02 (XOR)		00
		selection
	C157	Logical output signal 6 selection 1	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C158	Logical output signal 6 selection 2	Same as the settings of C021 to C026 (except those of LOG1 to LOG6)		00
	C159	Logical output signal 6 operator	00 (AND), 01 (OR), 02 (XOR)		00
		selection
	C160	Input terminal response time	0. to 200. ( ¯2ms)		1
		setting 1
	C161	Input terminal response time	0. to 200. ( ¯2ms)		1
		setting 2
	C162	Input terminal response time	0. to 200. ( ¯2ms)		1
response		setting 3
	C163	Input terminal response time	0. to 200. ( ¯2ms)		1
		setting 4
		Input terminal response time
terminal	C164		0. to 200. ( ¯2ms)		1
		setting 5
	C165	Input terminal response time	0. to 200. ( ¯2ms)		1
Input		setting 6
	C166	Input terminal response time	0. to 200. ( ¯2ms)		1
		setting 7
	C167	Input terminal response time	0. to 200. ( ¯2ms)		1
		setting 8
	C168	Input terminal response time	0. to 200. ( ¯2ms)		1
		setting FW
Other	C169	Multistage speed/position	0. to 200. ( ¯10ms)		0
		determination time

1 - 13