Hitachi SJ700-2 Series service manual Free-setting V/f frequency To 400. Hz

					Default
	Code	Function name	Monitored data or setting				Note
				_FF	_FEF	_FUF
	b078	Cumulative input power data	Clearance by setting "01" and pressing the STR key		00
		clearance
	b079	Cumulative input power display	1. to 1000.		1.
		gain setting
	b082	Start frequency adjustment	0.10 to 9.99 (Hz)		0.50
	b083	Carrier frequency setting	0.5 to 15.0 (kHz) (subject to derating)		5.0
	b084	Initialization mode (parameters or	00 (clearing the trip history), 01 (initializing the data),		00
		trip history)	02 (clearing the trip history and initializing the data)
	b085	Country code for initialization	00 (Japan), 01 (EU), 02 (U.S.A.)	00	01	02
	b086	Frequency scaling conversion	0.1 to 99.0		1.0
		factor
	b087	STOP key enable	00 (enabling), 01 (disabling), 02 (disabling only the function to stop)		00
Others	b088	Restart mode after FRS	00 (starting with 0 Hz), 01 (starting with matching frequency), 02 (starting		00
			with active matching frequency)
	b089	Automatic carrier frequency	00: invalid, 01: valid		00
		reduction
	b090	Dynamic braking usage ratio	0.0 to 100.0 (%)		0.0
	b091	Stop mode selection	00 (deceleration until stop), 01 (free-run stop)		00
	b092	Cooling fan control	00 (always operating the fan), 01 (operating the fan only during inverter		00
			operation [including 5 minutes after power-on and power-off])
	b095	Dynamic braking control	00 (disabling), 01 (enabling [disabling while the motor is topped]), 02		00
			(enabling [enabling also while the motor is topped])
	b096	Dynamic braking activation level	330 to 380, 660 to 760(V)		360/
					720
	b098	Thermistor for thermal protection	00 (disabling the thermistor), 01 (enabling the thermistor with PTC), 02		00
		control	(enabling the thermistor with NTC)
	b099	Thermal protection level setting	0. to 9999. (Ω)		3000.
	b100	Free-setting V/f frequency (1)	0. to "free-setting V/f frequency (2)" (Hz)		0.
	b101	Free-setting V/f voltage (1)	0.0 to 800.0 (V)		0.0
characteristic	b102	Free-setting V/f frequency (2)	0. to "free-setting V/f frequency (3)" (Hz)		0.
	b103	Free-setting V/f voltage (2)	0.0 to 800.0 (V)		0.0
	b104	Free-setting V/f frequency (3)	0. to "free-setting V/f frequency (4)" (Hz)		0.
	b105	Free-setting V/f voltage (3)	0.0 to 800.0 (V)		0.0
	b106	Free-setting V/f frequency (4)	0. to "free-setting V/f frequency (5)" (Hz)		0.
of V/f
	b107	Free-setting V/f voltage (4)	0.0 to 800.0 (V)		0.0
setting	b108	Free-setting V/f frequency (5)	0. to "free-setting V/f frequency (6)" (Hz)		0.
	b109	Free-setting V/f voltage (5)	0.0 to 800.0 (V)		0.0
Free
	b110	Free-setting V/f frequency (6)	0. to "free-setting V/f frequency (7)" (Hz)		0.
	b111	Free-setting V/f voltage (6)	0.0 to 800.0 (V)		0.0
	b112	Free-setting V/f frequency (7)	0. to 400. (Hz)		0.
	b113	Free-setting V/f voltage (7)	0.0 to 800.0 (V)		0.0
	b120	Brake Control Enable	00 (disabling), 01 (enabling)		00
	b121	Brake Wait Time for Release	0.00 to 5.00 (s)		0.00
	b122	Brake Wait Time for Acceleration	0.00 to 5.00 (s)		0.00
	b123	Brake Wait Time for Stopping	0.00 to 5.00 (s)		0.00
	b124	Brake Wait Time for Confirmation	0.00 to 5.00 (s)		0.00
	b125	Brake Release Frequency Setting	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
	b126	Brake Release Current Setting	0.0 to 2.00 x "rated current"	Rated current of inverter
Others	b127	Braking frequency	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
	b130	Overvoltage suppression enable	00 (disabling the restraint), 01 (controlled deceleration), 02 (enabling		00
			acceleration)
	b131	Overvoltage suppression level	330 to 390 (V) (200 V class model), 660 to 780 (V) (400 V class model)		380/
					760
	b132	Acceleration and deceleration	0.10 to 30.00 (s)		1.00
		rate at overvoltage suppression
	b133	Overvoltage suppression	0.00 to 2.55		0.50
		propotional gain
	b134	Overvoltage suppression Integral	0.000 to 9.999 / 10.00 to 65.53 (s)		0.060
		time

1 - 9