Hitachi SJ700-2 Series service manual Extended Function Mode

1.2.3 Extended Function Mode

					Default
	Code	Function name	Monitored data or setting				Note
				_FF	_FEF	_FUF
	A001	Frequency source setting	00 (keypad potentiometer) (*1), 01 (control circuit terminal block), 02 (digital	02	01	01
			operator), 03 (RS485), 04 (option 1), 05 (option 2), 06 (pulse-string input), 07
			(easy sequence), 10 (operation function result)
	A002	Run command source setting	01 (control circuit terminal block), 02 (digital operator), 03 (RS485), 04 (option	02	01	01
			1), 05 (option 2)
settings	A003	Base frequency setting	30. to "maximum frequency " (Hz)	60.	50.	60.
	A203	motor	30. to "maximum frequency, 2nd motor" (Hz)	60.	50.	60.
		Base frequency setting, 2nd
Basic
	A303	motor	30. to "maximum frequency, 3rd motor" (Hz)	60.	50.	60.
		Base frequency setting, 3rd
	A004	Maximum frequency setting	30. to 400. (Hz)	60.	50.	60.
	A204	Maximum frequency setting, 2nd	30. to 400. (Hz)	60.	50.	60.
		motor
	A304	Maximum frequency setting, 3rd	30. to 400. (Hz)	60.	50.	60.
		motor
		[AT] selection	00 (switching between O and OI terminals), 01 (switching between O and O2
	A005		terminals), 02 (switching between O terminal and keypad potentiometer) (*1),		00
			03 (switching between OI terminal and keypad potentiometer) (*1), 04
			(switching between O2 and keypad potentiometer) (*1)
	A006	[O2] selection	00 (single), 01 (auxiliary frequency input via O and OI terminals)		03
			(nonreversible), 02 (auxiliary frequency input via O and OI terminals)
			(reversible), 03 (disabling O2 terminal)
others	A011	[O]-[L] input active range start	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		frequency
and	A012	[O]-[L] input active range end	0.00 to 99.99, 100.0 to 400.0 (Hz)		0.00
		frequency
input
	A013	[O]-[L] input active range start	0. to "[O]-[L] input active range end voltage" (%)		0.
Analog		voltage
	A014	[O]-[L] input active range end	"[O]-[L] input active range start voltage" to 100. (%)		100.
		voltage
	A015	[O]-[L] input active range start	00 (external start frequency), 01 (0 Hz)		01
		frequency selection
	A016	External frequency filter time	1. to 30. or 31. (500 ms filter ±0.1 Hz with hysteresis)		31.
		const.
	A017	Easy sequence function	00 (disabling), 01 (enabling)		00
		selection
	A019	Multispeed operation selection	00 (binary: 16 speeds selectable with 4 terminals), 01 (bit: 8 speeds selectable		00
			with 7 terminals)
	A020	Multispeed frequency setting	0.0 or “start frequency” to “maximum frequency” (Hz)		0.00
	A220	Multispeed frequency setting,	0.0 or “start frequency” to “maximum frequency, 2nd motor” (Hz)		0.00
		2nd motor
	A320	Multispeed frequency setting,	0.0 or “start frequency” to “maximum frequency, 3rd motor” (Hz)		0.00
		3rd motor
	A021	Multispeed 1 setting	0.0 or “start frequency” to “1st maximum frequency” (Hz)		0.00
	A022	Multispeed 2 setting	0.0 or “start frequency” to “2nd maximum frequency” (Hz)		0.00
	A023	Multispeed 3 setting	0.0 or “start frequency” to “3rd maximum frequency” (Hz)		0.00
jogging	A024	Multispeed 4 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A025	Multispeed 5 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
and	A026	Multispeed 6 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
operation	A027	Multispeed 7 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A028	Multispeed 8 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
Multispeed	A029	Multispeed 9 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A030	Multispeed 10 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A031	Multispeed 11 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A032	Multispeed 12 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A033	Multispeed 13 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A034	Multispeed 14 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A035	Multispeed 15 setting	0.0 or “start frequency” to “n-th maximum frequency” (Hz)		0.00
	A038	Jog frequency setting	"Start frequency" to 9.99 (Hz)		1.00
			00 (free-running after jogging stops [disabled during operation]), 01
			(deceleration and stop after jogging stops [disabled during operation]), 02 (DC
	A039	Jog stop mode	braking after jogging stops [disabled during operation]), 03 (free-running after		00
			jogging stops [enabled during operation]), 04 (deceleration and stop after
			jogging stops [enabled during operation]), 05 (DC braking after jogging stops
			[enabled during operation])
.

1 - 4