Hitachi SJ700-2 Series service manual Function Mode

Code		Function name		Monitored data or setting				Default		Note
d025		User monitor 0		-2147483647 to 2147483647 (upper 4 digits including “-“)					−
d026		User monitor 1		-2147483647 to 2147483647 (upper 4 digits including “-“)					−
d027		User monitor 2		-2147483647 to 2147483647 (upper 4 digits including “-“)					−
d028		Pulse counter		0 to 2147483647 (upper 4 digits)					−
d029		Position setting monitor		-1073741823 to 1073741823 (upper 4 digits including “-“)					−
d030		Position feedback monitor		-1073741823 to 1073741823 (upper 4 digits including “-“)					−
d080		Trip Counter		0. to 9999., 1000 to 6553 (10000 to 65530) (times)					−
d081		Trip monitoring 1		Factor, frequency (Hz), current (A), voltage across P-N (V), running time (hours),					−
				power-on time (hours)
d082		Trip monitoring 2		Factor, frequency (Hz), current (A), voltage across P-N (V), running time (hours),					−
				power-on time (hours)
d083		Trip monitoring 3		Factor, frequency (Hz), current (A), voltage across P-N (V), running time (hours),					−
				power-on time (hours)
d084		Trip monitoring 4		Factor, frequency (Hz), current (A), voltage across P-N (V), running time (hours),					−
				power-on time (hours)
d085		Trip monitoring 5		Factor, frequency (Hz), current (A), voltage across P-N (V), running time (hours),					−
				power-on time (hours)
d086		Trip monitoring 6		Factor, frequency (Hz), current (A), voltage across P-N (V), running time (hours),					−
				power-on time (hours)
d090		Programming error monitoring		Warning code					−
d102		DC voltage monitoring		0.0 to 999.9 (V)					−
d103		BRD load factor monitoring		0.0 to 100.0 (%)					−
d104		Electronic thermal overload monitoring		0.0 to 100.0 (%)					−
1.2.2 Function Mode
						Default
Code		Function name		Monitored data or setting
					_FF		_FEF		_FUF
		Output frequency setting	0.0, "start frequency" to "maximum frequency" (or maximum frequency,
F001			2nd/3rd motors) (Hz)				0.00
			0.0 to 100.0 (when PID function is enabled)
F002	Acceleration (1) time setting		0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)				30.00
F202	Acceleration (1) time setting, 2nd		0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)				30.00
		motor
F302	Acceleration (1) time setting, 3rd		0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)				30.00
		motor
F003	Deceleration (1) time setting		0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)				30.00
F203	Deceleration time setting, 2nd motor		0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)				30.00
F303	Deceleration time setting, 3rd motor		0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)				30.00
F004	Keypad Run key routing		00 (forward rotation), 01 (reverse rotation)				00

1 - 3