Introduction
Welcome to OutBack Power Technologies
Thank you for purchasing the OutBack Radian Series Inverter/Charger. This product offers a complete power conversion system between batteries and AC power. It can provide backup power, sell power back to the utility grid or provide complete
Uses energy from photovoltaic arrays, wind turbines, and other renewable resources. Use of OutBack FLEXmax charge controllers will optimize power production from PV sources.
Dual AC inputs allow direct connection to utility grid and AC generator
Rapid transfer between AC source and inverter output with minimal delay time
Six selectable input modes for different applications
∼Generator
∼Support
∼Grid Tied
∼UPS (Uninterruptible Power Supply)
∼Backup
∼Mini Grid
8000 watts (8 kW) continuous power at 48 Vdc
16.97 kVA peak surge capacity
Stackable in parallel configuration up to 10 inverters
Modular internal design allows low idle consumption and high efficiency at both high and low power operation
Certified by ETL to UL1741 and CSA C22.2
Uses MATE3 System Display and Controller
Figure 1 GS8048 Inverter/Charger
IMPORTANT:
The Radian Series Inverter/Charger is not intended for use with the OutBack MATE or
MATE2 System Display and Controller. It is only compatible with the MATE3 System
Display and Controller.
5 |