Grizzly G0648 owner manual Rolling-Filter Replacement, Removing recovery axle

Rolling-Filter

Replacement

This rolling-type paper filter is the consumable workhorse filter of your machine. It removes most of the 10-micron and larger grit, dust, and oily smoke.

Tools Needed	Qty
OSHA Approved Respirator	1
To perform this procedure:

1.Put on your respirator and open the rolling- filter supply cabinet door (Figure 25).

Figure 25. Rolling-filter supply cabinet.

2.Open the rolling-filter recovery cabinet door (Figure 26).

Figure 26. Rolling-filter recovery cabinet.

G0648 Welding Fume Extractor

3.While holding the axle, push on the spring- loaded spindle and swing the axle out and away from the spindle cone (Figure 27).

Axle Spindle Cone

Figure 27. Removing supply axle.

4.Remove the spent filter tube, and slide the axle into the center of the new filter roll.

5.Orient the rolling-filter so when you look through the window and the filter paper is pulled up by the conveyor, the filter paper is next to the glass window. The filter paper should block the view of the roll as seen in

Figure 25.

6.Install the axle and paper roll onto the spring loaded spindle.

7.Depress the spring-loaded spindle, swing the recovery axle out and away from the spindle cone, remove and discard the used filter roll (Figure 28).

Figure 28. Removing recovery axle.

-27-