Emerson user manual Liebert XDR Dimensions, Move the Liebert XDR

Page 14

Mechanical Considerations

4.0MECHANICAL CONSIDERATIONS

4.1Liebert XDR Dimensions

The Liebert XDR is engineered to fit on the rear of a rack enclosure measuring approximately

24" x 42U. Consult the factory for other sizes. Figures 7, 8 and 9 illustrate the module’s dimensions and the location of pipes. Figure 11 shows the attachment positions of each module.

Figure 7 Overall dimensions with hard-piped connections

Piping is not load-bearing and

should never be used to lift or

4"

(102mm)

move the Liebert XDR.

1-5/16"

(33mm)

1-1/2"

(38mm)

82-3/8"

78-3/8"(2092mm) (1991mm)

110deg

1-1/8" (29mm)

2-1/8"

(54mm)

25-5/8"

(651mm)

20-1/2"

(520mm)

23-1/2" (597mm) 27-3/8" (695mm)

5-7/8"

(149mm)

27-3/8"

(695mm)

6-12"

(165mm)

8

Image 14

Contents Liebert XDR Important Safety Guidelines Fluorinated Greenhouse Gas Requirements-European UnionTable of Contents Installation Checklist and System Fill for Startup SpecificationsFigures Page Example XDR20B1R Component Locations and Model Number NomenclatureReferences Pre-Installation ChecksInstallation Considerations Packing ListProduct/System Description Checking and UnpackingRecyclable Packaging Module HandlingUnpacking the Module Removing packaging Removing the Liebert XDR from the Pallet Remove Liebert XDR from palletLiebert XDR Dimensions Move the Liebert XDROverall dimensions with one-shot coupling pre-charged Determining Placement in the Conditioned Space Overall dimensions with removable couplingGeneric airflow diagram AirflowInstalling the Rack-Mounting Kit onto the Rack Mounting the Liebert XDR on the Rack-Mounting KitDoor Safety Catch System Connection Configuration European Union Fluorinated Greenhouse Gas RequirementsConnection Methods and Points InsulationRecommended Piping Size Hard-Piped Connection SizesBrazing Preparations Leak-Checking and Evacuation Header System Refer to for detailsDegree Connection TOP View Tools Required Male coupling on Liebert XD cooling moduleHex body, union nut on one-shot coupling Connection Methods-Removable Couplings Removable couplings Return Main Supply Main Oil rings on header and Liebert XD Flex Pipe connectors Do not Overtighten Disconnect a Liebert XD Flex Pipe from a Liebert XD System Piping mains without Liebert XD Flex PipeDisconnecting the Liebert XD Flex Pipe from the Liebert XDR Removing the Liebert XDR from a CabinetChecklist for Proper Installation Charging with RefrigerantStarting the Liebert XD System Maintenance Fluorinated Greenhouse Gas RequirementsSpecifications Page Ne t