For Machines Mfg. Since 8/09 | O P E R A T I O N | Model SB1023 |
4.Position a 12mm open end wrench on the spindle shaft that protrudes from the motor fan cover (Figure 22).
Figure 22. Spindle shaft.
5.Using the wrenches, turn the spindle bolt clockwise as shown in Figure 23.
Hold
Figure 23. Hub removal.
6.Remove the spindle bolt (Figure 24).
Hub
Spindle bolt
Figure 24. Spindle bolt removal.
7.Oil the threads and thread the hub puller (Figure 25) into the hub until it stops.
Hub
Hub
Puller 
Figure 25. Hub puller.
8.While holding the wheel and hub from sliding off of the spindle, tighten the hub puller bolt until the wheel and hub assembly are pulled off the spindle as shown in Figure 26.
Hold