Southbend SB1023 manual Lower column leadscrew

For Machines Mfg. Since 8/09 M A I N T E N A N C E Model SB1023

4.Clean the lower column leadscrew section with mineral spirits, dry with a rag, and relubricate with any standard machine or multipurpose grade grease (Figure 38).

Figure 38. Lower column leadscrew.

5.Wipe the table cross feed grease fitting clean (Figure 39), and put two or three pumps of grease into it. Wipe off any grease that bleeds through the seams.

Grease Fitting

Figure 39. Cross way grease fitting.

Figure 40. Ball bearing ways.

Figure 41.Table ways and rack.

6. With the help of another person, lift the	7.	Clean the pinion, rack, bearings, ways, and
table off the ways and set the table upside		leadscrew with mineral spirits. Dry all parts,
down on a workbench (Figures 40-41).		and re-lubricate with white lithium grease.
	8.	With the help of your assistant,
		CAREFULLY place the table back onto the

ways. DO NOT drop the table or you may put a nick in a way and ruin it permanently.

-31-