Southbend SB1029 owner manual Controls, Control panel

For Machines Mfg. Since 8/09 O P E R A T I O N Model SB1029

Controls

Refer to Figures 16–18and the following descriptions to become familiar with the basic controls of this machine.

A.Longitudinal Travel Handwheel: Moves the table back and forth on the longitudinal axis (X-Axis).

B.Center Table Stop: Provides a barrier for the table stops to limit table movement.

C.Table Stops: Adjust along the length of the table to limit longitudinal travel.

DCross Axis Lock Knob: Locks the cross table movement.

EElevation Handwheel: Controls vertical movement (Z-Axis) of the grinding wheel assembly.

F.Cross Travel Handwheel: Moves the table forward and backward along the cross axis (Y-Axis).

G.Power Indicator Light: Illuminates when the grinding wheel motor is running.

H.Power On Button: Supplies power to the grinding wheel motor.

I.Emergency Stop (Off) Button: Cuts power to the grinding wheel motor.

J.Coolant Pump Switch: Control switch for the optional coolant pump accessory.

G

H

J

I

Figure 17. Control panel.

K.Port Lock Knob: Locks the dust port into position so it can be vertically positioned in the spark path.

A

C

D

B F

E

Figure 16. Basic controls.

K

Figure 18. Port lock knob.

-21-