DeWalt DWE575SB Adjustments, Changing Blades, Intended USE, To Install the Blade FIG

Page 9

INTENDED USE

These heavy-duty circular saws are designed for professional wood cutting applications. DO NOT use water feed attachments with this saw. DO NOT use abrasive wheels or blades. DO NOT use under wet conditions or in presence of flammable liquids or gases.

These heavy-duty saws are professional power tools. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

ADJUSTMENTS

Changing Blades

WARNING: To reduce the risk of injury, turn unit off and disconnect it from power source before installing and removing accessories, before adjusting or when making repairs. An

accidental start-up can cause injury.

FIG. 2

FIG. 3

K

I

J	N	M

TO INSTALL THE BLADE (FIG. 2–5)

1.Using the lower guard lever (K), retract the lower blade guard (I) and place blade on saw spindle against the inner clamp washer (M), making sure that the blade will rotate in the proper direction (the

direction of the rotation arrow on the saw blade and the teeth must point in the same direction as the direction of rotation arrow on the saw). Do not assume that the printing on the blade will always be facing you when properly installed. When retracting the lower blade guard to install the blade, check the condition and operation of the lower blade guard to assure that it is working properly. Make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.

2.	Place outer clamp washer (N) on FIG. 4
	saw spindle with the large flat	C
	surface against the blade and the	C
	surface against the blade and the
	wording on the outer clamp
	washer facing you.
3.	Thread blade clamping screw (J)
	into saw spindle by hand (screw
	has right-hand threads and must

be turned clockwise to tighten).
4. Depress the blade lock (C)	B
while turning the saw spindle	FIG. 5
with the blade wrench (O)
stored underneath the main
handle (B) (Fig. 5), until the
blade lock engages and the
blade stops rotating.
5. Tighten the blade clamping
screw firmly with the blade
wrench.
NOTE: Never engage the blade
lock while saw is running, or
engage in an effort to stop the	O
tool. Never turn the saw on while	O
the blade lock is engaged. Serious
damage to your saw will result.

English

7

Image 9

Contents Guide Dutilisation Manual DE Instrucciones Page General Power Tool Safety Warnings Deﬁnitions Safety GuidelinesWork Area Safety Electrical SafetyPower Tool USE and Care Personal SafetyFurther Safety Instructions for All Saws Safety Instructions for All SawsService Causes and Operator Prevention of KickbackLower Guard Safety Instructions Additional Speciﬁc Safety Instructions for Circular SawsArsenic and chromium from chemically-treated lumber Save These Instructions for Future USE MotorComponents Fig To Install the Blade FIG AdjustmentsChanging Blades Intended USECutting Depth Adjustment Fig To Replace the Blade , 4Lower Blade Guard Bevel Angle Adjustment Fig Adjusting Depth Adjustment Lever FIGBevel Detent Fig Operation Cutting Ripping FIG KickbackIs recommended Improper Workpiece SupportMaintenance Foot Plate Adjustment Cleaning LubricationElectric Brake DWE575SB Brushes FigAdjusting Bevel Adjustment Lever Adjusting for 90 Degree CutsIt may be desirable to adjust Bevel adjustment lever. It BladesThree Year Limited Warranty AccessoriesAddition to the warranty, Dewalt tools are covered by our Year Free ServiceDéﬁnitions lignes directrices en Matière de sécurité Sécurité DU Lieu DE TravailSécurité EN Matière D’ÉLECTRICITÉ Utilisation ET Entretien D’UN Outil Électrique Sécurité PersonnelleRéparation Consignes de sécurité propres à toutes les sciesFrançais Consignes DE Sécurité Relatives AU PROTÈGE-LAME Inférieur Calibres minimaux des rallonges Volts Moteur Conserver CES Consignes Pour Utilisation UltérieureInstallation DE LA Lame FIG Remplacement des lamesDescription Fig AjustementsRemplacement DE LA Lame , 4 PROTÈGE-LAME Inférieur Réglage de la profondeur de coupe ﬁgSoulevez le levier de réglage De profondeur Afin d’obtenir Profondeur de coupe désirée CommeRéglage de l’angle de biseau ﬁg Dispositif de détente de l’angle de biseau ﬁgRéglage DU Levier DE Réglage DE Profondeur FIG Fonctionnement Coupe Coupe Longitudinale DW3278, est recommandéeCoupe Interne FIG Contact avec la pièce le Maintiendra en position pourRebonds Configuration DE Profondeur DE Coupe IncorrecteSupport DE Pièce Inadéquat Torsion DE LA Lame Mésalignement DE CoupeFrein électrique DWE575SB LubriﬁcationNettoyage ReparationsRéglage de la plaque d’assise Balais FigRéglage DES Coupes À 90 Lames AccessoiresIl pourra s’avérer nécessaire de Il pourra se desserrer avec le tempsContrat D’ENTRETIEN Gratuit D’UN AN Garantie limitée de trois ansDC9071, DC9091, DC9096, DC9280, DC9360 et DC9180 et la Garantie DE Remboursement DE 90 JoursDeﬁniciones Normas de seguridad Seguridad EN EL Área DE TrabajoSeguridad Eléctrica USO Y Mantenimiento DE LA Herramienta Eléctrica Seguridad PersonalMantenimiento Instrucciones de seguridad para todas las sierrasCausas DEL Retroceso Y SU Prevención POR EL Operador Instrucciones DE Seguridad Para EL Protector Inferior Calibre mínimo para cables de alimentación Voltios Guarde Estas Instrucciones Para Futuras Consultas Ajustes Componentes FigCambio de hojas USO DebidoPara Cambiar LA Hoja , 4 Para Instalar LA Hoja FIGProtector Inferior DE LA Hoja Regulación de la profundidad de corte FigPalanca de ajuste de la Asegúrese ApretarDispositivo de retén Fig Regulación del ángulo de bisel FigPalanca DE Ajuste DE LA Profundidad FIG Funcionamiento Corte Dewalt DW3278 W Cortar a LO Largo DE LA Veta FIGCortes DE Orificios FIG Hace en un piso, pared u otraConfiguración DE Profundidad DE Corte Inapropiado RetrocesoSoporte Inadecuado DE LA Pieza DE Trabajo Limpieza MantenimientoTorsión DE LA Hoja MAL Alineamiento EN EL Corte Materiales QUE Requieren MÁS AtenciónEscobillas Fig LubricacionFreno Electrico DWE575SB ReparacionesHojas Ajuste de la baseRegule Sierra a Regulación DE LA Palanca DE Ajuste DEL BiselAccesorios Garantía limitada por tres años Póliza de GarantíaPara Otras Localidades ExcepcionesInformación Tecnica Garantía DE Reembolso DE SU Dinero POR 90 DíasPage DEC11 Part No. N143176 DWE575, DWE575SB Ewalt Industrial Tool Co., 701 Joppa Road, Baltimore, MD