Bosch Power Tools 5412L, 5312 manual Assembling Dust Elbow And Dust Bag, Dust port

2610009642 10/09 E:2610009642 10/09 E 10/20/09 3:17 PM Page 12

Assembly

Assembling Dust Elbow And Dust Bag

1.With the miter arm locked in the down position, push the dust elbow onto the dust port. Push the dust bag onto the elbow and rotate both to de- sired position. (Figure 4).

2.Position dust chute/bag so that it does not inter- fere with the tool during the cutting operation for all miter/bevel settings. Make sure dust bag does not interfere with the slide rails during slide cutting.

3.The dust bag requires emptying when full of sawdust. Empty it frequently and after comple- tion of sawing. Carefully remove dust bag from dust elbow. Empty dust bag in proper trash bin by unzipping the bag. Be extremely careful of dust disposed, materials in fine particle form

may be explosive. Do not throw sawdust on an openfire. Spontaneous combustion, may in time, result from mixture of oil or water with dust particles.

Note: The dust port also accepts a standard 1-1/4" vacuum tube for dust collection.

!WARNING When sawing chemically pres- sure treated lumber, paint that

may be lead based, or any other materials that may contain carcinogens, use special precau- tions. A suitable respirator must be worn by all per- sonnel entering the work area. Work area should be sealed by plastic sheeting and persons not pro- tected should be kept out until work area is thor- oughly cleaned.

Dust Bag Dust Elbow

Dust port

figure 4. Dust Elbow and Dust Bag

-12-