90520983 VPX1301 Cut SAW 7/19/07 3:03 PM Page 11
TREE TRIMMING
•Use a coarse blade when cutting tree limbs. Hold shoe firmly against tree branch. If possible, cut close to the trunk to minimize movement of the branch.
PROJECT TIPS
•Cut only with sharp blades; they cut cleaner, faster and put less strain on the motor while cutting.
•Place blade and shoe lightly against work to be cut. This will improve operator control and minimize vibration.
•For longer blade life, use
•Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
•Switch on saw motor and allow it to obtain maximum speed before applying pressure
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
TROUBLESHOOTING
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Battery pack not installed properly. | • Checkbatterypackinstallation. |
| • Battery pack not charged. | • Check battery pack |
|
| charging requirements. |
•Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into charger until red LED appears.
• Charger not plugged in. | • Plug charger into a working |
| outlet. Refer to “Important |
| Charging Notes” for more |
| details. |
| • If chargers are daisy chained |
| together check all connections. |
| • Check current at receptacle |
| by plugging in a lamp or other |
| appliance. |
| • Check to see if receptacle |
| is connected to a light |
| switch which turns power off |
| when you turn out the lights. |
• Surrounding air temperature. | • Move charger and battery |
| to a surrounding air |
| temperatureofabove40 |
| degrees F (4,5°C) or below |
| 105 degrees F (+40,5°C). |
• Battery pack too hot or too cold. | •The charger will not |
| charge a battery pack if the |
| cell temperature is below |
| approximately 32°F (0°C) |
| or above 140°F (60°C). |
| The battery pack should be |
| left in the charger and the |
| charger will begin to charge |
| automatically when the cell |
| temperature warms up or |
| cools down. |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
11