Black & Decker 606404-00, BT2500 instruction manual Maintenance

Page 13

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts

CARE OF THE TABLE TOP

Protect your investment. Keep your table saw clean. If you notice signs of rust, steel wool the areas, clean with mineral spirits or denatured alcohol and apply paste wax.

MAINTAINING FENCE SYSTEM

Your fence should always slide freely. If it seems to require excessive force to slide or if it feels rough, wipe the rails and fence head gliding surface with a cloth or paper towel. Check the movement again. If it still feels rough, clean the fence head with a mild solvent such as dena- tured alcohol or mineral spirits. Re-coat the rail with a heavy coat of paste wax or a light oil. Slide the fence head back and forth several times to coat the rail and fence. Wipe off any excess wax or oil from the rail. If fence still does not move freely, refer to rip fence adjust- ment section.

LUBRICATION

First clean off any accumulated sawdust from the gears and the worms with a stiff brush. Next, remove any pitch or resin which has built up. You may need to use a solvent such as mineral spirits to remove it. Next, re-apply grease to the gears marked with arrows in Figure

30.You can also apply paste wax to the gears if you find that the grease is attracting too much sawdust. NOTE: Keep all spray lubricants away from upper guard.

Over time, the lubricants used in the mechanism of your table saw may need to be replenished.

30

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-54-HOW-TO. (800-544-6986).

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers are staffed with trained per- sonnel to provide customers with efficient and reliable power tool service.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

To find your local service location, refer to the yellow page directory under “Tools—Electric” or call: 1-800-54-HOW-TO(800-544-6986).

FULL TWO-YEAR HOME USE WARRANTY

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in materi- al or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under “Tools- Electric” in the yellow pages of the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state and province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents BT2500 10 Table SAW Table of Contents Grounding Instructions Important Safety InstructionsSpecifications Additional Safety Rules for Table SawsSAW Blade Guard and Spreader Making a Push Stick BackExtension Table Hardware Necessary HardwareFig. a Unpacking & ASSEMBLY- FIG.ATools Included Assembly for BT2500Tools YOU will Need to Supply Aligning and leveling the front rail assembly Figures 9,10 Attaching rear rails Figures 16,17 AdjustmentsRip Fence Operation and Adjustments Figure Micro Adjustment Knob FigureIf you are experiencing problems with the fence slipping Replacing the Blade FigureOperating Instructions OperationRipping Small Pieces Bevel RippingMitering CrosscuttingMaintenance Page Guide D’UTILISATION Table DES Matières Importantes Consignes DE Sécurité Directives Concernant LA Mise À LA TerreFabrication D’UN Bâton Poussoir Couverture Arrière PROTÈGE-LAME ET Barre D’ÉCARTEMENTTermes Montants Avant ET Arrière Ferrures requisesClés Support DE PattesDéballage ET Assemblage Figure a Assemblage de la scie d’établi modèle BT2500 Étape 3. Installation des quatre pattes figures 1, 2 etOutils Requis Étape 4. Nettoyage de la surface du plateauFermement sans exercer trop de force figure Étape 11. Fixation des montants arrière figures 16 et 22 CDébrancher LA Scie D’ÉTABLI Avant D’EFFECTUER LES Réglages RéglagesRemarque Serrer Sans Exercer Trop DE Force Bouton DE MICRO-RÉGLAGES Figure Remplacement DE LA Lame FigureMise À Niveau DE LA Scie Interrupteur DE MARCHE-ARRÊTFonctionnement Mode d’emploiEntretien Information SUR LES Services AccessoiresGarantie Complète DE Deux ANS Pour Usage Résidentiel Page Manual DE Instrucciones Indice Instrucciones DE Seguridad Importantes Instrucciones Para LA Conexión a TierraLAS Herramientas Deben Recibir UN Mantenimiento Cuidadoso Protegehoja Y Separador Reglas Adicionales DE Seguridad Para Sierras DE MesaRebotes Como Evitarlos Y Protegerse DE Posibles Lesiones Como Hacer UNA Vara DE Empuje Cubierta PosteriorEspecificaciones Herrajes necesariosBolsa DE Llaves Herraje Para LA Mesa DE ExtensiónDesempaque Y Ensamblado FIG.A Herramientas QUE Usted Debe Suministrar Ensamblado de la BT2500Paso 3. Instale las cuatro patas. Figuras 1,2,3 Page Paso 11. Unión de los rieles traseros Figuras 16,17 AjustesHaga Todos LOS Ajustes CON LA Sierra DE Mesa Desconectada Nota no Apriete EN Exceso Perilla DE Microajustes FiguraInstrucciones de operación OperaciónCorte AL Hilo EN Bisel Corte LongitudinalCorte Longitudinal EN Piezas Pequeñas Corte AL TravésMantenimiento Información DE Servicio AccesoriosGarantía Completa POR DOS Años Para USO Doméstico EspecificacionesPage

606404-00, BT2500 specifications

The Black & Decker BT2500 (part number 606404-00) is a powerful and versatile tool designed for various home improvement and DIY projects. This product exemplifies the brand's commitment to quality, innovation, and user-friendly design, making it an excellent addition to both amateur and professional toolkits.

One of the standout features of the BT2500 is its robust motor, which delivers exceptional power and efficiency. This ensures that users can complete tasks quickly and effectively, whether they're drilling into tough materials like wood or metal or engaging in more delicate work. The tool's capability to handle a wide range of applications is a significant advantage, as it allows users to use it for multiple projects without needing additional equipment.

The BT2500 also incorporates advanced ergonomic design elements, which enhance user comfort during prolonged use. The soft-grip handle is a key aspect of this design, providing a secure and comfortable grip that reduces hand fatigue. Furthermore, the tool’s lightweight construction allows for easy maneuverability, ensuring that users can work in various positions without straining their bodies.

Another important technological feature of the BT2500 is its variable speed control. This allows users to adjust the speed according to the specific requirements of their projects, ensuring optimal performance and precision. The ability to customize speed settings is particularly useful when working on different materials or when delicate control is required.

Additionally, the BT2500 is equipped with a built-in LED work light. This feature illuminates the workspace, making it easier to see what you are doing, especially in dimly lit conditions. The LED light can significantly improve accuracy and safety while working, reducing the likelihood of errors or accidents.

The tool comes with a range of accessories, further enhancing its versatility. Users can easily switch between different attachments for drilling, driving, or even sanding tasks, making it a multifaceted tool suitable for various home improvement projects.

In summary, the Black & Decker BT2500 (606404-00) is a well-rounded power tool marked by its powerful motor, ergonomic design, variable speed control, and handy built-in LED work light. Its versatility and ease of use make it a valuable asset for anyone looking to tackle home repairs, renovations, or creative DIY endeavors. Whether you are a seasoned professional or a DIY enthusiast, the BT2500 is engineered to meet a wide array of needs, enabling users to achieve satisfying and high-quality results in their projects.
Top Page Image Contents