C. Controls and Functions
Prior to attempting to operate the engine, read the information contained in the engine owner's manual. An engine owner’s manual is supplied with every gasoline powered concrete saw.
1.Check Oil: Add oil if low. Refer to the Deutz engine owner's manual for the recommended SAE viscosity grades. Capacity of oil is 6.4 qt (6.1 liters)
2.Check Fuel: Fill if low. Use only Diesel Fuel rated for on Highway use.
Never use a gasoline or an oil and gasoline mixture!
3.Air Cleaner: Never run the engine without the air cleaner! Rapid engine wear will result from contaminants being drawn through the carburetor and into the engine.
4.Controls/Gauges:
|
| Engine Control | Depth Lock |
| Oil | Module w/Hour | |
|
| ||
Pressure | Meter |
|
Power Point | Tachometer | |
Switch | Depth Gauge | |
| Volt Meter | |
Blade Saver | Vernier | |
Switch | ||
Throttle | ||
| ||
Optional | Raise/Lower | |
Switch | ||
Water Pump | ||
Switch |
|
Fuse |
| Emergency Kill | |
| Switch (Hidden | ||
|
| from view by | |
|
| Forward/Reverse | |
| Lever) | ||
|
| ||
Power Point |
|
| |
Fuel Cap | Ignition Power | Forward/Reverse | |
Lever | |||
Key Switch | |||
w/Gauge |
| ||
|
|
Transmission
Engage/Disengage Lever
Location of Controls and Gauges
15