Norton Abrasives C6136 Oil Specifications, Oil Quality Grade, Approved Oils Deutz, Oil Viscosity

Page 32

Oil Specifications:
Oil Type (Shipped from factory):	SAE 20W20
Oil Change Quantity with Filter:	8.45 qt (8 liters)
Oil Quality Grade:

Lube Oils are differentiated by Deutz according to their performance and quality class. Oils of other comparable specifications can be used. If you have any questions please contact your local Deutz service center.

Approved Oils:

Deutz	DQC I	DQC II	DQC III
ACEA	CF/CF-4	CG-4/CH-4	-NA-
API	CF/CF-4	CG-4/CH-4	-NA-
DHD	-NA-	DHD-1	-NA-

See the Deutz Operation Manual or contact your local Deutz Service Center for more information.

Oil Viscosity:

In general multi-viscosity oils should be used. The viscosity of oil to be used is dependent on the ambient temperature of the environment that the engine will be operating in. Use the table to the left to determine the SAE grade based on ambient environment temperatures. If the ambient temperature is lower than the limits of the SAE grade selected the cold starting performance of the engine will be affected. Do not exceed the temperature application limits for the SAE grade selected for extended periods of time. For more information see the Deutz Operation Manual or contact your local Deutz Service Center.

32

Image 32

Contents Owners Manual C3120 C6120 C3126 C6126 C3130 C6130 C6136Warranty Table of Contents Safety Precautions Hazard SymbolsDust and Silica Warning Eye Protection Hearing Respiratory Head ProtectionYou Are Responsible For Your Safety Assembly C31xx Concrete Saw Specifications Dimensions/WeightCharacteristics EngineC61xx Concrete Saw Specifications Blade Size Maximum Depth Blade Shaft RPMInstalling the Blade II. OperationBlade Shaft Installation Changing the Blade Side Multiple Mounted Blades DescriptionFront Pointer Assembly Controls and Functions Never use a gasoline or an oil and gasoline mixtureControls/Gauges Location of Controls and GaugesControl and Gauge locations and function Chart Type Function Type Function Starting the EngineStraight Drive 31 & 61 HP RPMJackshaft Drive 61HP Water SupplyOperating the Saw Eye Protection Hearing Respiratory Head Protection Straight Drive 31 & 61 HP Jackshaft Drive 61HPPage Cutting Technique Depth GaugeDepth Lock Depth Gauge and Depth Lock LocationsStep Cutting Additional Guide Lines for Sawing Lead Off Adjustment Page III. Maintenance EngineLocations of Engine Components Deutz Engine Components ‡Oil Checking the Oil ‡ Oil Filler Neck and Dipstick Locations ‡Oil Specifications Oil Quality GradeApproved Oils Deutz Oil ViscosityFuel Specifications Lube Oil Change Intervals in Operating HoursDiesel Bio Diesel FuelWinter Fuel Grades Engine Service Fault Measures Cause SectionCh/Cl Ch/TAir Filter Assembly Dry Cutting Engine Maintenance Air Filter C31xxAir Filter C61xx Part DescriptionSpeed RPM Temperature Condition BearingsBearing Location Shaft Size Maximum Grease in Ounces Frequency of LubricationBelts Engine is running Hydraulic Raise/Lower SystemRemember too much tension shortens belt and bearing life Raise and Lower Speeds of the Hydraulic SystemPage Hydraulic Pump Maintenance Page Page Page Page Page Page Page Page Page Transmission 20W Straight Viscosity SE, CC, or CD Rated Engine Oil Self-Propelling OperationsRecommended Fluids For Eaton Model 6 Transmissions Speed Control Lever Transmission Engage/Disengage LeverTransmission Maintenance Too Move the MachineElectrical System Wiring Section a Accessory/Switches Wiring Section B Controls/Instruments Wiring Section C Wiring Harness Connector Control/Instrument SideWiring Section D Engine Wiring HarnessOrdering Information Description Part Number14, 20 and 26 Blade Size Only 36 Blade Size OnlyBlade Guard Conversion Chart Straight Drive Non-Jackshaft Models OnlyService Parts Main Frame Group 31HP and 61HP Description Shaft Cover 61 HP Engine Group 61HP AIR Filter Inner Safety Engine Group 31HP Fuel Filter Element 31HP Only Stub Shaft Group 31HP and 61HP Sold Individually Instrument Panel Group 31HP and 61HP Instrument Panel Housing Transmission and Rear Axle Group 31HP and 61HP # 40 Drive Chain Transmission and Rear Axle Group Depth Stop and Front Axle Group 31HP and 61HP Depth Stop Handle Controls and Lever Group Switch Boot Electro-Hydraulic Group 31HP and 61HP Electro-Hydraulic Group Blade Shaft Group Non-Jackshaft 31HP and 61HP Blade Shaft Group Non-Jackshaft Bearing TAP BaseBlade Guard Group Blade Guard Group 31HP and 61HP Water Control System Group Optional Water Pump Group FIT Barb ½ MPT X ½ Male Saint-Gobain Abrasives, Inc