Norton Abrasives C6130 Lube Oil Change Intervals in Operating Hours, Fuel Specifications, Diesel

Oil Change intervals ‡:

		Lube Oil Grade
Deutz Lube Oil Quality Class	DQC I		DQC II	DQC III
ACE Specification	E2-96		E3-96/E5-02	E4-99
API Specification	CF/CF-4		CG-4/CH-4	-NA-
World Wide Specification	-NA-		DHD-1	-NA-
Standard Lube Oil code for	EO
building equipment and non-	EO A		EO C	-NA-
road vehicles	EO B

		Lube Oil Change Intervals in Operating Hours
Engine Series	Engine Version	Oil Use		Oil Use		Oil Use
Engine	Type	Normal	High	Normal	High	Normal	High
F3L2011	Turbo	250	125	500	250	500	250

See the Deutz Operation Manual for more information.

Always refer to the engine manual for more detailed information on checking the oil, changing oil, and oil capacity, and fuel type to use. Use only Deutz Oil Filters.

Fuel Specifications:

Fuel: Use only commercial grade Diesel fuel rated for on highway use with less than 0.5% sulfur content. If the sulfur content is greater than 0.5% the oil change interval will fall in the high use category in the table under Oil Change Intervals. If the sulfur content is greater than 1% contact a Deutz Service Center before using. The following fuel specifications are approved by Deutz

Diesel:

DIN EN 590

BS 2569: A1 and A2 (with A2 please note the sulfur content)

ASTM D 975-88; 1-D and 2-D

NATO Code F-54 and F-75

ISO 8217 DMX

ISO 8217 DMA

Bio Diesel Fuel:

According to the DIN 51606 Frame

Exhaust emission values may change dependent on the fuel type. Please check with local authorities for the type approval test.

For more information see the Deutz Operation Manual or contact your local Deutz Service Center.

33