Norton Abrasives C6120, C3120, C3126, C3130, C6136, C6130, C6126 owner manual III. Maintenance, Engine

Page 29

III. Maintenance

A: Engine

Always refer to the Deutz Engine Operation Manual for complete detailed instructions and latest information. If you do not have your original Deutz Engine Operation Manual, contact the Deutz Corporation for a replacement.

DEUTZ Corporation

3883 Steve Reynolds Blvd

Norcross, GA 30093

Central Office Number (770) 564-7100

Web Site: http://www.deutzamericas.com

The Saint-Gobain Abrasives, Inc. does not warranty the engine. If any warranty or service of the engine is required contact your nearest Deutz service center @ (770) 564-7100, or from the Internet: http://www.deutzamericas.com

Before performing any service or maintenance to the engine or machine:

1.Always wear approved:

Eye Protection	Hearing	Respiratory	Head Protection
	Protection	Protection

NOTE: ‡ =The following information is from the Deutz Operation Manual for the 2011 series Diesel Engines.

2.Position the machine on a flat surface and chock the wheels so that the machine will not roll or move.

3.Turn the Ignition Power Key Switch to the off position.

4.Disconnect the Positive (red) Battery Cable from the Battery:

5.Familiarize your self with the locations and functions of all components of the machine and engine.

29

Image 29

Contents C3120 C6120 C3126 C6126 C3130 C6130 C6136 Owners ManualWarranty Table of Contents Hazard Symbols Safety PrecautionsEye Protection Hearing Respiratory Head Protection Dust and Silica WarningYou Are Responsible For Your Safety Assembly Dimensions/Weight C31xx Concrete Saw SpecificationsCharacteristics EngineBlade Size Maximum Depth Blade Shaft RPM C61xx Concrete Saw SpecificationsII. Operation Installing the BladeBlade Shaft Installation Changing the Blade Side Description Multiple Mounted BladesFront Pointer Assembly Never use a gasoline or an oil and gasoline mixture Controls and FunctionsControls/Gauges Location of Controls and GaugesControl and Gauge locations and function Chart Type Function Starting the Engine Type FunctionRPM Straight Drive 31 & 61 HPJackshaft Drive 61HP Water SupplyOperating the Saw Eye Protection Hearing Respiratory Head Protection Jackshaft Drive 61HP Straight Drive 31 & 61 HPPage Depth Gauge Cutting TechniqueDepth Gauge and Depth Lock Locations Depth LockStep Cutting Additional Guide Lines for Sawing Lead Off Adjustment Page Engine III. MaintenanceDeutz Engine Components ‡ Locations of Engine ComponentsOil Filler Neck and Dipstick Locations ‡ Oil Checking the Oil ‡Oil Quality Grade Oil SpecificationsApproved Oils Deutz Oil ViscosityLube Oil Change Intervals in Operating Hours Fuel SpecificationsDiesel Bio Diesel FuelWinter Fuel Grades Cause Section Engine Service Fault MeasuresCh/Cl Ch/TAir Filter Assembly Air Filter C31xx Dry Cutting Engine MaintenancePart Description Air Filter C61xxBearings Speed RPM Temperature ConditionBearing Location Shaft Size Maximum Grease in Ounces Frequency of LubricationHydraulic Raise/Lower System Belts Engine is runningRemember too much tension shortens belt and bearing life Raise and Lower Speeds of the Hydraulic SystemPage Hydraulic Pump Maintenance Page Page Page Page Page Page Page Page Page Transmission 20W Straight Viscosity SE, CC, or CD Rated Engine Oil Self-Propelling OperationsRecommended Fluids For Eaton Model 6 Transmissions Transmission Engage/Disengage Lever Speed Control LeverToo Move the Machine Transmission MaintenanceElectrical System Wiring Section a Accessory/Switches Wiring Section B Controls/Instruments Control/Instrument Side Wiring Section C Wiring Harness ConnectorWiring Harness Wiring Section D EngineDescription Part Number Ordering Information14, 20 and 26 Blade Size Only 36 Blade Size OnlyStraight Drive Non-Jackshaft Models Only Blade Guard Conversion ChartService Parts Main Frame Group 31HP and 61HP Description Shaft Cover 61 HP Engine Group 61HP AIR Filter Inner Safety Engine Group 31HP Fuel Filter Element 31HP Only Stub Shaft Group 31HP and 61HP Sold Individually Instrument Panel Group 31HP and 61HP Instrument Panel Housing Transmission and Rear Axle Group 31HP and 61HP # 40 Drive Chain Transmission and Rear Axle Group Depth Stop and Front Axle Group 31HP and 61HP Depth Stop Handle Controls and Lever Group Switch Boot Electro-Hydraulic Group 31HP and 61HP Electro-Hydraulic Group Blade Shaft Group Non-Jackshaft 31HP and 61HP Bearing TAP Base Blade Shaft Group Non-JackshaftBlade Guard Group Blade Guard Group 31HP and 61HP Water Control System Group Optional Water Pump Group FIT Barb ½ MPT X ½ Male Saint-Gobain Abrasives, Inc