Dual Servo Spin Welder User’s Manual
Setting Time and Date On Touch Screen
The time and date displayed on the touch screen are preset at the factory for US Central Standard Time. They can be changed using the following procedure:
1.Press the upper
2.Press the “Clock” button. The screen shown in
Figure 5-39 should appear.
3.To change the date and time, first enter a numeric value. Then press the corresponding button associ- ated with that value. For example, to set the month to May, press 5 and then the “Mon” button.
4.After setting the time and date, press the “Exit” button on this screen and on the next screen.
5.Wait several seconds for the touch screen to return to normal operation before welding.
Figure 5-37 Touch Screen - Time and Date 1
Figure 5-38 Touch Screen - Time and Date 2
| Figure |
|
|
Page 46 | Dukane Manual Part No. |