Dukane 403-570-01 user manual AC Power, Amp 240V Figure

Dual Servo Spin Welder User’s Manual

AC Power

The Dual Servo Spin Welder requires a 240 VAC 1– phase outlet rated at 20 Amps. All machine models use the same power cord and plug. The AC power cord is permanently attached to the welder. The other end of the cable has a 240 VAC, 1–phase plug shown in Figure 3–4. This is designed for a NEMA 6–20R configuration wall receptacle shown in Figure 3–5.

Directly below the AC cord strain relief is the AC power switch. The switch combines the functions of a power switch and a 20 Amp circuit breaker. The breaker/switch

240 Voltlt AC Plugl

(NEMA( 6–20P))

240 Volt AC Socket

(NEMA 6–20R)

is identical on all models and is shown in Figure 3–6.

Figure 3–4 20–Amp 240V Figure 3–5	20–Amp 240V
Plug	Receptacle

AC Power Cord

AC Power Switch

Figure 3–6AC Power Switch and Power Cord

Page  18 Dukane Manual Part No. 403-570-01