Section 12 - Specifications
Identification Numbers
Welder Model & Serial
Number
The serial number and model number tag for the Dual Servo Spin Welder are located either on the covers on the back of the machine or on the underside of the motor mounting plate just above the tooling hub.
Regulatory Agency Compliance
CE Marking
This mark on your equipment certifies that it meets the requirements of the EU (European Union) concerning interference causing equipment regulations. CE stands for Conformité Europeéne (European Conformity). The Dual Servo Spin Welder complies with the following CE requirements.
•The EMC Directive 89/336/EEC
•The Low Voltage Directive 73/23/EEC.
•The Machinery Directive 89/392/EEC using
Effective 12/29/09:
The Machinery Directive 2006/42/EC.
EN 60204: 2006
Safety of Machinery - Electrical Equipment of Machines Part 1: General Requirements.
DO NOT make any modifica- tions to the Dual Servo Spin Welder.. The changes may re- sult in violating one or more
regulations under which this equipment is manufactured..CAUTION
Dukane Manual Part No. | Page 93 |