Section 12 - Specifications
Tooling Specifications
Tooling Size
Refer to Table
Machine Weight
The Dual Servo Spin Welder weighs approximately 400 lbs. (182 kg). It should be mounted on a table or bench capable of supporting 650 lbs. (295 kg) to accommodate the additional force imposed by the vertical movement of the motor and slide during the spin welding operation.
Use mechanical means such as a forklift or hoist to place the servo spin welder on its work bench. There are two 3/4 inch lifting eyes located at the top of the column (see Figure
Power Requirements
The Dual Servo Spin Welder requires a 240 VAC 1– phase outlet rated at 20 Amps. All welder models use the same power cord and plug. The AC power cord has a 240 VAC, single phase plug which is designed for a NEMA
Operating
Environment
Operate the Dual Servo Spin Welder within these guidelines:
Temperature: | 40°F to 95°F (+5°C to +35°C) |
Altitude: | 4570 m (15,000 ft) |
Air Particulates: | Keep the welder dry. |
| Minimize exposure to moisture, dust |
| dirt, smoke and mold. |
Humidity: | 5% to 95% |
| +30°C |
24020 Volt AC Socket
(NEMA 6–20R)
Figure 12–1 240V AC Single–Phase AC Receptacle
Dukane Manual Part No. | Page 91 |