English
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICE
DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained either in the packaging, call the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call
Troubleshooting
PROBLEM | SOLUTION |
|
|
Motor does not run | Check power cord, plugs and outlet. |
|
|
| Ensure the on/off /tool control switch is in |
| the ON position ( ). |
Suction capacity | Remove blockages in the suction nozzle, |
decreases | suction tube, suction hose or filters. |
|
|
| Replace the paper or fleece bag. |
|
|
| Check for proper installation of the filters. |
|
|
| Clean or replace the filters. |
|
|
| Empty canister, refer to Empty Canister |
| under Operation. |
PROBLEM | SOLUTION |
Vacuum stops running Thermal overload has been tripped:
1.Turn the vacuum off and disconnect vacuum cleaner from power source.
2.Empty the canister, if needed.
3.Allow the unit to cool.
4.Plug the power cord into an appropriate outlet and turn on/off/tool control switch to the ON position ( 
) to test. If vacuum will not restart call
Dust comes out while | Check for proper installation of the filters. | ||
vacuuming |
| ||
Ensure filters are not damaged; replace if | |||
| necessary. |
|
|
| Ensure filter seals are in place and are | ||
| secure. |
|
|
Automatic filter | Listen for the solenoid clicking to ensure | ||
cleaning is not | the filter cleaning mechanism is working. | ||
working |
|
|
|
Power tool does not | Ensure the on/off/tool control switch is in | ||
turn on. | the ACTIVATION position | . | |
|
|
| |
| SPECIFICATIONS |
| |
|
| DWV012 |
|
Volts |
| 120 V ~ |
|
Hertz |
| 60 |
|
Rated Current | 15 A per UL1017 | ||
Maximum speed current | 11.6 A |
| |
Minimum speed current | 7 A |
| |
Capacity |
| 10 gallon (38 liters) | |
Weight |
| 33.5 lbs. (15.1 kg) | |
10