Juniper Networks C2000 manual Series Platform Overview, System Description, Series Platform Models

Page 17

Chapter 1

C-series Platform Overview

This chapter provides introductory information about the C-series platform. It contains the following topics:

■System Description on page 3

■C-series Platform Models on page 3

■C-series Model Components on page 5

■Network Management Tools on page 6

System Description

The C-series platform enables you to easily install, configure, and support Juniper Networks Session and Resource Control-Policy Engine (SRC-PE) software. It provides easy access to troubleshooting information, such as reporting events, logs, and system dumps while providing session resource controller functionality.

There are two C-series platform models: the C2000 model and the C4000 model. Each model is composed of two hard drives, fans, redundant power supplies, two USB ports, a console management port, and four Ethernet ports. The main difference between the two models is the number of service session licenses and concurrent subscribers allowed on each unit.

C-series Platform Models

Two C-series platform models are available:

■C2000

■C4000

Both models use the same software. However, the specific model determines the number of service session licenses and concurrent subscribers allowed on each unit. (See Table 4 on page 4.)

System Description ■ 3

Image 17

Contents C2000 and C4000 Hardware Guide Series Platforms Hardware Guide End User License Agreement IiiPage Table of Contents Chapter Setting the Initial Configuration Part Hardware Maintenance Procedures and SpecificationsChapter Managing RAID Disks on a C-series Platform Part Index Audience About This GuideObjectives Text Conventions Documentation ConventionsUser@host# set local-address Related Juniper Networks DocumentationCore Documentation Set Juniper Networks C-series and SRC Technical PublicationsDocumentation Feedback Obtaining DocumentationRequesting Support Product Overview C2000 and C4000 1.0.x Hardware Guide Product Overview Series Platform Models Series Platform OverviewSystem Description C2000, Front View Series Model DifferencesC4000, Rear View Series Model ComponentsCLI Management Network Management ToolsSnmp MIB Management Page Initial Installation C2000 and C4000 1.0.x Hardware Guide Initial Installation Before You Begin Unpacking and Inspecting the C-series PlatformUnpacking the Units Inspecting System Components and AccessoriesIf You Detect or Suspect Damage Contacting Juniper NetworksFreestanding Installation Installing and Cabling the C-series PlatformInstallation Guidelines Rack-Mounted InstallationInstalling the System Preparing the Equipment RacksCabling the Management Console Cabling the SystemCabling Ethernet Interfaces Cabling the System for PowerC2000, Front View Next Step Powering Up Powering Up the C-series PlatformModel LEDs Status LEDsSetting Up Management Access and Logging Setting the Initial ConfigurationConfiguration Overview Configuring the Juniper Networks Database Edit Root@host# set system host-name my-hostname Configuring Hostname and Domain ParametersConfiguring the System for Remote Access Configuring the System to Accept SSH and Telnet Connections Adding an Admin User Account Set the password of the user C2000 and C4000 1.0.x Hardware Guide Next Step Hardware Maintenance Procedures and Specifications Page Required Tools and Items Maintaining the SystemStoring Modules and Components Cleaning the SystemRemoving and Installing a Fan Removing and Installing a Power Supply Module Removing and Installing a Hard Drive C2000 Model Specifications System SpecificationsC2000 Model Specifications C4000 Model Specifications C4000 Model SpecificationsSystem Specifications Page Series Platform Data Storage Managing RAID Disks on a C-series PlatformReplacing a Disk Managing Disks in a C-series PlatformViewing Information About Disks on a C-series Platform Reinitializing an Active DiskField Name Field Description Show disk status Output FieldsYour Preinstallation Responsibilities Installation Guidelines and RequirementsRegulatory Compliances Environmental RequirementsSafety Guidelines Mechanical Requirements Equipment Rack RequirementsCabling Recommendations Proper Rack InstallationSpace Requirements Product Reclamation and Recycling Program FCC Requirements for Consumer Products Hardware ComplianceFederal Communications Commission FCC Statement Avis CS-03 dIndustrie Canada Industry Canada Notice CS-03C. Explanatory Notes Equipment Attachment Limitations EC Declaration of Conformity Contacting Customer Support Return ProcedureContacting Customer Support and Returning Hardware Information You Might Need to Supply to Jtac Locating Component Serial NumbersPacking Instructions for Returning a Chassis Returning Products for Repair or ReplacementTools and Parts Required Remove the chassis from the rack Declaration of Conformity Declaration of ConformityPage Index C2000 and C4000 1.0.x Hardware Guide Index Compliance Manuals