Juniper Networks C2000, C4000 manual Setting the Initial Configuration, Configuration Overview

Page 35

Chapter 5

Setting the Initial Configuration

This chapter discusses how to set up the C-series platform after powering it on. For basic information on the management of the system, see the SRC–PE Getting Started Guide.

This chapter contains the following topics:

■Configuration Overview on page 21

■Setting Up Management Access and Logging In on page 21

■Configuring the Juniper Networks Database on page 22

■Configuring Hostname and Domain Parameters on page 23

■Configuring the System for Remote Access on page 24

■Configuring the System to Accept SSH and Telnet Connections on page 25

■Adding an Admin User Account on page 26

■The Next Step on page 27

Configuration Overview

After powering on the system, there are six main steps required to get it ready to work with:

1.Connect a management console to the system, configure it, and log in.

2.Configure the Juniper Networks Database.

3.Configure hostname and domain information.

4.Configure the system for remote access.

5.Configure the system to accept SSH and Telnet connections.

6.Add an Admin user account.

Setting Up Management Access and Logging In

Before you power up the system, you must set up a management console. (See “Connecting to a Console Terminal” on page 16.)

Configuration Overview ■ 21

Image 35

Contents C2000 and C4000 Hardware Guide Series Platforms Hardware Guide End User License Agreement IiiPage Table of Contents Chapter Setting the Initial Configuration Part Hardware Maintenance Procedures and SpecificationsChapter Managing RAID Disks on a C-series Platform Part Index Audience About This GuideObjectives Text Conventions Documentation ConventionsUser@host# set local-address Related Juniper Networks DocumentationCore Documentation Set Juniper Networks C-series and SRC Technical PublicationsDocumentation Feedback Obtaining DocumentationRequesting Support Product Overview C2000 and C4000 1.0.x Hardware Guide Product Overview Series Platform Models Series Platform OverviewSystem Description C2000, Front View Series Model DifferencesC4000, Rear View Series Model ComponentsCLI Management Network Management ToolsSnmp MIB Management Page Initial Installation C2000 and C4000 1.0.x Hardware Guide Initial Installation Before You Begin Unpacking and Inspecting the C-series PlatformContacting Juniper Networks Inspecting System Components and AccessoriesUnpacking the Units If You Detect or Suspect DamageFreestanding Installation Installing and Cabling the C-series PlatformPreparing the Equipment Racks Rack-Mounted InstallationInstallation Guidelines Installing the SystemCabling the Management Console Cabling the SystemCabling Ethernet Interfaces Cabling the System for PowerC2000, Front View Next Step Powering Up Powering Up the C-series PlatformModel LEDs Status LEDsSetting Up Management Access and Logging Setting the Initial ConfigurationConfiguration Overview Configuring the Juniper Networks Database Edit Root@host# set system host-name my-hostname Configuring Hostname and Domain ParametersConfiguring the System for Remote Access Configuring the System to Accept SSH and Telnet Connections Adding an Admin User Account Set the password of the user C2000 and C4000 1.0.x Hardware Guide Next Step Hardware Maintenance Procedures and Specifications Page Required Tools and Items Maintaining the SystemStoring Modules and Components Cleaning the SystemRemoving and Installing a Fan Removing and Installing a Power Supply Module Removing and Installing a Hard Drive C2000 Model Specifications System SpecificationsC2000 Model Specifications C4000 Model Specifications C4000 Model SpecificationsSystem Specifications Page Series Platform Data Storage Managing RAID Disks on a C-series PlatformReplacing a Disk Managing Disks in a C-series PlatformViewing Information About Disks on a C-series Platform Reinitializing an Active DiskField Name Field Description Show disk status Output FieldsYour Preinstallation Responsibilities Installation Guidelines and RequirementsRegulatory Compliances Environmental RequirementsSafety Guidelines Mechanical Requirements Equipment Rack RequirementsCabling Recommendations Proper Rack InstallationSpace Requirements Product Reclamation and Recycling Program FCC Requirements for Consumer Products Hardware ComplianceFederal Communications Commission FCC Statement Avis CS-03 dIndustrie Canada Industry Canada Notice CS-03C. Explanatory Notes Equipment Attachment Limitations EC Declaration of Conformity Contacting Customer Support Return ProcedureContacting Customer Support and Returning Hardware Information You Might Need to Supply to Jtac Locating Component Serial NumbersPacking Instructions for Returning a Chassis Returning Products for Repair or ReplacementTools and Parts Required Remove the chassis from the rack Declaration of Conformity Declaration of ConformityPage Index C2000 and C4000 1.0.x Hardware Guide Index Compliance Manuals