Juniper Networks C2000 manual C4000 Model Specifications

Page 50

C2000 and C4000 1.0.x Hardware Guide

Table 6: C2000 Model Specifications (continued)

Category	Specification
Airflow	■	Air intake occurs in the front of the system.
	■	Air is exhausted out of the rear of the system.
Electromagnetic Emissions Agency Certification	■	Pending

C4000 Model Specifications

Table 7: C4000 Model Specifications

Category	Specification
Weight	48 lb (22 kg)
Dimensions	3.5 (H) x 16.7 (W) x 24 (D) inches
	8.89 (H) x 42.42 (W) x 60.96 (D) cm
Environmental Requirements
Temperature	■ Operating: 50° to 104° F (10° to 40° C)
	■ Storage: –40° to 158° F (–40° ˚ to 70° C)
Relative humidity	■ Operating: 8% to 90% (noncondensing)
	■ Storage: 5% to 95% (noncondensing)
Ambient storage temperature	–40° ˚ to 158° F (–40° ˚ to 70° C), 95% relative humidity
Ambient storage humidity	5% to 95% (noncondensing)
Heat Dissipation	700 W, 2389 BTU/hour maximum
AC Input
Power required	100-240 VAC @ –5 A
AC line frequency	50-60 Hz
Power	700 W
Space Requirements	■ 3 feet (90 cm) behind system or rack.
	■ Do not block air vents on or back of the system.
Airflow	■ Air intake occurs in the front of the system.
	■ Air is exhausted out of the rear of the system.
Safety Agency Certification	■ Pending

36■ C4000 Model Specifications

Image 50

Contents C2000 and C4000 Hardware Guide Series Platforms Hardware Guide Iii End User License AgreementPage Table of Contents Part Hardware Maintenance Procedures and Specifications Chapter Setting the Initial ConfigurationChapter Managing RAID Disks on a C-series Platform Part Index Audience About This GuideObjectives Documentation Conventions Text ConventionsRelated Juniper Networks Documentation User@host# set local-addressJuniper Networks C-series and SRC Technical Publications Core Documentation SetObtaining Documentation Documentation FeedbackRequesting Support Product Overview C2000 and C4000 1.0.x Hardware Guide Product Overview Series Platform Models Series Platform OverviewSystem Description Series Model Differences C2000, Front ViewSeries Model Components C4000, Rear ViewNetwork Management Tools CLI ManagementSnmp MIB Management Page Initial Installation C2000 and C4000 1.0.x Hardware Guide Initial Installation Unpacking and Inspecting the C-series Platform Before You BeginIf You Detect or Suspect Damage Inspecting System Components and AccessoriesUnpacking the Units Contacting Juniper NetworksInstalling and Cabling the C-series Platform Freestanding InstallationInstalling the System Rack-Mounted InstallationInstallation Guidelines Preparing the Equipment RacksCabling the System Cabling the Management ConsoleCabling the System for Power Cabling Ethernet InterfacesC2000, Front View Next Step Powering Up the C-series Platform Powering UpStatus LEDs Model LEDsSetting Up Management Access and Logging Setting the Initial ConfigurationConfiguration Overview Configuring the Juniper Networks Database Configuring Hostname and Domain Parameters Edit Root@host# set system host-name my-hostnameConfiguring the System for Remote Access Configuring the System to Accept SSH and Telnet Connections Adding an Admin User Account Set the password of the user C2000 and C4000 1.0.x Hardware Guide Next Step Hardware Maintenance Procedures and Specifications Page Maintaining the System Required Tools and ItemsStoring Modules and Components Cleaning the SystemRemoving and Installing a Fan Removing and Installing a Power Supply Module Removing and Installing a Hard Drive C2000 Model Specifications System SpecificationsC2000 Model Specifications C4000 Model Specifications C4000 Model SpecificationsSystem Specifications Page Managing RAID Disks on a C-series Platform Series Platform Data StorageManaging Disks in a C-series Platform Replacing a DiskReinitializing an Active Disk Viewing Information About Disks on a C-series PlatformShow disk status Output Fields Field Name Field DescriptionInstallation Guidelines and Requirements Your Preinstallation ResponsibilitiesEnvironmental Requirements Regulatory CompliancesSafety Guidelines Equipment Rack Requirements Mechanical RequirementsCabling Recommendations Proper Rack InstallationSpace Requirements Product Reclamation and Recycling Program FCC Requirements for Consumer Products Hardware ComplianceFederal Communications Commission FCC Statement Industry Canada Notice CS-03 Avis CS-03 dIndustrie CanadaC. Explanatory Notes Equipment Attachment Limitations EC Declaration of Conformity Contacting Customer Support Return ProcedureContacting Customer Support and Returning Hardware Locating Component Serial Numbers Information You Might Need to Supply to JtacPacking Instructions for Returning a Chassis Returning Products for Repair or ReplacementTools and Parts Required Remove the chassis from the rack Declaration of Conformity Declaration of ConformityPage Index C2000 and C4000 1.0.x Hardware Guide Index Compliance Manuals