Juniper Networks C2000, C4000 manual Cabling the System, Cabling the Management Console

Page 29

Chapter 3: Installing and Cabling the C-series Platform

1.With one person standing on the left side of the chassis and another standing on the right side, lift the unit into the rack.

2.Position the system in its designated location in the equipment rack. Make sure the holes of the mounting brackets align evenly with the holes of the equipment rack on both sides.

3.Starting at the bottom of the system, have the third person secure the system in the equipment rack by using the 10-32 x 3/8 Phillips screws.

4.Connect the necessary cables.

Cabling the System

Cabling the system requires the following main tasks:

1.Familiarize yourself with the ports, and ensure that you have the cables and wires needed to complete each cabling procedure.

2.Read and understand all safety warnings. (See “Installation Guidelines and Requirements” on page 43.)

3.Connect the system to the network and to a management console.

4.Connect the other interfaces to their appropriate network interface.

5.Connect the power cables from the power source to the system's power supply.

NOTE: We recommend that you use shielded cables where appropriate.

See “System Specifications” on page 35 for more information about system specifications.

Cabling the Management Console

Before powering up the system, you must set up a management console. The console enables you to communicate with your system during the power-up process and to manage your system using the command-line interface (CLI).

When connecting a console directly to the system, use a cable appropriate for your terminal connector. The cable must have a female DB-9 connector to attach to the RS-232 port on the system.

Management Ports

The management section of the system has three ports for management access (see Figure 7 and Figure 9):

Cabling the System ■ 15

Image 29

Contents C2000 and C4000 Hardware Guide Series Platforms Hardware Guide End User License Agreement IiiPage Table of Contents Chapter Setting the Initial Configuration Part Hardware Maintenance Procedures and SpecificationsChapter Managing RAID Disks on a C-series Platform Part Index Audience About This GuideObjectives Text Conventions Documentation ConventionsUser@host# set local-address Related Juniper Networks DocumentationCore Documentation Set Juniper Networks C-series and SRC Technical PublicationsDocumentation Feedback Obtaining DocumentationRequesting Support Product Overview C2000 and C4000 1.0.x Hardware Guide Product Overview Series Platform Models Series Platform OverviewSystem Description C2000, Front View Series Model DifferencesC4000, Rear View Series Model ComponentsCLI Management Network Management ToolsSnmp MIB Management Page Initial Installation C2000 and C4000 1.0.x Hardware Guide Initial Installation Before You Begin Unpacking and Inspecting the C-series PlatformUnpacking the Units Inspecting System Components and AccessoriesIf You Detect or Suspect Damage Contacting Juniper NetworksFreestanding Installation Installing and Cabling the C-series PlatformInstallation Guidelines Rack-Mounted InstallationInstalling the System Preparing the Equipment RacksCabling the Management Console Cabling the SystemCabling Ethernet Interfaces Cabling the System for PowerC2000, Front View Next Step Powering Up Powering Up the C-series PlatformModel LEDs Status LEDsSetting Up Management Access and Logging Setting the Initial ConfigurationConfiguration Overview Configuring the Juniper Networks Database Edit Root@host# set system host-name my-hostname Configuring Hostname and Domain ParametersConfiguring the System for Remote Access Configuring the System to Accept SSH and Telnet Connections Adding an Admin User Account Set the password of the user C2000 and C4000 1.0.x Hardware Guide Next Step Hardware Maintenance Procedures and Specifications Page Required Tools and Items Maintaining the SystemStoring Modules and Components Cleaning the SystemRemoving and Installing a Fan Removing and Installing a Power Supply Module Removing and Installing a Hard Drive C2000 Model Specifications System SpecificationsC2000 Model Specifications C4000 Model Specifications C4000 Model SpecificationsSystem Specifications Page Series Platform Data Storage Managing RAID Disks on a C-series PlatformReplacing a Disk Managing Disks in a C-series PlatformViewing Information About Disks on a C-series Platform Reinitializing an Active DiskField Name Field Description Show disk status Output FieldsYour Preinstallation Responsibilities Installation Guidelines and RequirementsRegulatory Compliances Environmental RequirementsSafety Guidelines Mechanical Requirements Equipment Rack RequirementsCabling Recommendations Proper Rack InstallationSpace Requirements Product Reclamation and Recycling Program FCC Requirements for Consumer Products Hardware ComplianceFederal Communications Commission FCC Statement Avis CS-03 dIndustrie Canada Industry Canada Notice CS-03C. Explanatory Notes Equipment Attachment Limitations EC Declaration of Conformity Contacting Customer Support Return ProcedureContacting Customer Support and Returning Hardware Information You Might Need to Supply to Jtac Locating Component Serial NumbersPacking Instructions for Returning a Chassis Returning Products for Repair or ReplacementTools and Parts Required Remove the chassis from the rack Declaration of Conformity Declaration of ConformityPage Index C2000 and C4000 1.0.x Hardware Guide Index Compliance Manuals