Juniper Networks C2000, C4000 manual Safety Guidelines

Page 59

Chapter 9: Installation Guidelines and Requirements

Safety Guidelines

For your safety, before installing the system, review all safety warnings in this topic.

WARNING: The recommended maximum ambient temperature is 40˚° C (104° F). For safe operation take into consideration the internal temperature within the rack.

WARNING: Install equipment in the rack from the bottom upward. Doing this helps maintain the stability of the rack and reduces the chance of the rack tipping over.

WARNING: Do not insert any metal object, such as a screwdriver, into the system. Doing so can cause electric shock and serious burns.

WARNING: Three people are required to install the system in a rack: two to lift the system into position and one to screw it to the rack.

WARNING: Connect the system or rack to ground (earth), and ensure that a reliable grounding path is maintained in the rack.

WARNING: Do not work on the system or connect or disconnect cables during lightning activity.

WARNING: Be sure that circuit breakers for the power source are in the OFF position before attaching power cables.

Safety Guidelines ■ 45

Image 59

Contents C2000 and C4000 Hardware Guide Series Platforms Hardware Guide End User License Agreement IiiPage Table of Contents Chapter Setting the Initial Configuration Part Hardware Maintenance Procedures and SpecificationsChapter Managing RAID Disks on a C-series Platform Part Index Audience About This GuideObjectives Text Conventions Documentation ConventionsUser@host# set local-address Related Juniper Networks DocumentationCore Documentation Set Juniper Networks C-series and SRC Technical PublicationsDocumentation Feedback Obtaining DocumentationRequesting Support Product Overview C2000 and C4000 1.0.x Hardware Guide Product Overview Series Platform Models Series Platform OverviewSystem Description C2000, Front View Series Model DifferencesC4000, Rear View Series Model ComponentsCLI Management Network Management ToolsSnmp MIB Management Page Initial Installation C2000 and C4000 1.0.x Hardware Guide Initial Installation Before You Begin Unpacking and Inspecting the C-series PlatformContacting Juniper Networks Inspecting System Components and AccessoriesUnpacking the Units If You Detect or Suspect DamageFreestanding Installation Installing and Cabling the C-series PlatformPreparing the Equipment Racks Rack-Mounted InstallationInstallation Guidelines Installing the SystemCabling the Management Console Cabling the SystemCabling Ethernet Interfaces Cabling the System for PowerC2000, Front View Next Step Powering Up Powering Up the C-series PlatformModel LEDs Status LEDsSetting Up Management Access and Logging Setting the Initial ConfigurationConfiguration Overview Configuring the Juniper Networks Database Edit Root@host# set system host-name my-hostname Configuring Hostname and Domain ParametersConfiguring the System for Remote Access Configuring the System to Accept SSH and Telnet Connections Adding an Admin User Account Set the password of the user C2000 and C4000 1.0.x Hardware Guide Next Step Hardware Maintenance Procedures and Specifications Page Required Tools and Items Maintaining the SystemStoring Modules and Components Cleaning the SystemRemoving and Installing a Fan Removing and Installing a Power Supply Module Removing and Installing a Hard Drive C2000 Model Specifications System SpecificationsC2000 Model Specifications C4000 Model Specifications C4000 Model SpecificationsSystem Specifications Page Series Platform Data Storage Managing RAID Disks on a C-series PlatformReplacing a Disk Managing Disks in a C-series PlatformViewing Information About Disks on a C-series Platform Reinitializing an Active DiskField Name Field Description Show disk status Output FieldsYour Preinstallation Responsibilities Installation Guidelines and RequirementsRegulatory Compliances Environmental RequirementsSafety Guidelines Mechanical Requirements Equipment Rack RequirementsCabling Recommendations Proper Rack InstallationSpace Requirements Product Reclamation and Recycling Program FCC Requirements for Consumer Products Hardware ComplianceFederal Communications Commission FCC Statement Avis CS-03 dIndustrie Canada Industry Canada Notice CS-03C. Explanatory Notes Equipment Attachment Limitations EC Declaration of Conformity Contacting Customer Support Return ProcedureContacting Customer Support and Returning Hardware Information You Might Need to Supply to Jtac Locating Component Serial NumbersPacking Instructions for Returning a Chassis Returning Products for Repair or ReplacementTools and Parts Required Remove the chassis from the rack Declaration of Conformity Declaration of ConformityPage Index C2000 and C4000 1.0.x Hardware Guide Index Compliance Manuals