Juniper Networks C4000, C2000 manual Adding an Admin User Account

Page 40

C2000 and C4000 1.0.x Hardware Guide

To configure the system to accept Telnet connections:

■In edit mode, type the following command.

[edit]

user@host# set system services telnet

Adding an Admin User Account

Although root access is used for initial configuration of the system, user accounts are used to enter commands and statements at the CLI. Therefore, you must set up an admin account to allow further configuration. You can use a built-in class, such as super-user.

To configure an account for an administrative user:

1.Create an account for an administrative user.

[edit]

user@host # edit system login user user

For example:

[edit]

user@host # edit system login user myadmin

2.Set the class for the administrative user to the login class that you created.

[edit system login user myadmin] user@host # set class class

For example:

[edit system login user myadmin] user@host # set class super-user

3.Specify the name of the administrative user.

[edit system login user myadmin] user@host # set full-name “John Doe”

4.Set the CLI editing level to expert.

[edit system login user myadmin] user@host# set level expert

5.(Optional) Specify that a space be used for command completion.

[edit system login user myadmin] user@host # set complete-on-space on

6.Verify that the configuration for the administrative user is correct.

[edit system login user myadmin]

26■ Adding an Admin User Account

Image 40

Contents C2000 and C4000 Hardware Guide Series Platforms Hardware Guide Iii End User License AgreementPage Table of Contents Part Hardware Maintenance Procedures and Specifications Chapter Setting the Initial ConfigurationChapter Managing RAID Disks on a C-series Platform Part Index Objectives About This GuideAudience Documentation Conventions Text ConventionsRelated Juniper Networks Documentation User@host# set local-addressJuniper Networks C-series and SRC Technical Publications Core Documentation SetObtaining Documentation Documentation FeedbackRequesting Support Product Overview C2000 and C4000 1.0.x Hardware Guide Product Overview System Description Series Platform OverviewSeries Platform Models Series Model Differences C2000, Front ViewSeries Model Components C4000, Rear ViewNetwork Management Tools CLI ManagementSnmp MIB Management Page Initial Installation C2000 and C4000 1.0.x Hardware Guide Initial Installation Unpacking and Inspecting the C-series Platform Before You BeginInspecting System Components and Accessories Unpacking the UnitsIf You Detect or Suspect Damage Contacting Juniper NetworksInstalling and Cabling the C-series Platform Freestanding InstallationRack-Mounted Installation Installation GuidelinesInstalling the System Preparing the Equipment RacksCabling the System Cabling the Management ConsoleCabling the System for Power Cabling Ethernet InterfacesC2000, Front View Next Step Powering Up the C-series Platform Powering UpStatus LEDs Model LEDsConfiguration Overview Setting the Initial ConfigurationSetting Up Management Access and Logging Configuring the Juniper Networks Database Configuring Hostname and Domain Parameters Edit Root@host# set system host-name my-hostnameConfiguring the System for Remote Access Configuring the System to Accept SSH and Telnet Connections Adding an Admin User Account Set the password of the user C2000 and C4000 1.0.x Hardware Guide Next Step Hardware Maintenance Procedures and Specifications Page Maintaining the System Required Tools and ItemsRemoving and Installing a Fan Cleaning the SystemStoring Modules and Components Removing and Installing a Power Supply Module Removing and Installing a Hard Drive C2000 Model Specifications System SpecificationsC2000 Model Specifications C4000 Model Specifications C4000 Model SpecificationsSystem Specifications Page Managing RAID Disks on a C-series Platform Series Platform Data StorageManaging Disks in a C-series Platform Replacing a DiskReinitializing an Active Disk Viewing Information About Disks on a C-series PlatformShow disk status Output Fields Field Name Field DescriptionInstallation Guidelines and Requirements Your Preinstallation ResponsibilitiesEnvironmental Requirements Regulatory CompliancesSafety Guidelines Equipment Rack Requirements Mechanical RequirementsSpace Requirements Proper Rack InstallationCabling Recommendations Product Reclamation and Recycling Program Federal Communications Commission FCC Statement Hardware ComplianceFCC Requirements for Consumer Products Industry Canada Notice CS-03 Avis CS-03 dIndustrie CanadaC. Explanatory Notes Equipment Attachment Limitations EC Declaration of Conformity Contacting Customer Support and Returning Hardware Return ProcedureContacting Customer Support Locating Component Serial Numbers Information You Might Need to Supply to JtacTools and Parts Required Returning Products for Repair or ReplacementPacking Instructions for Returning a Chassis Remove the chassis from the rack Declaration of Conformity Declaration of ConformityPage Index C2000 and C4000 1.0.x Hardware Guide Index Compliance Manuals