1 Read the Owner’s Manual.
2 Do not overtighten wire spool brake pressure. Tighten only until wire does not overspool from wire supply spool.
3 Do not overtighten drive roll pressure. Tighten only until drive roll will not slip (motor will not stall) on a stationary wire.
3-2. Rating Label For CE Products
| S/N: |
|
| |
U1 | = 24 V | 1 | 50/60 | Hz |
I1 | = 5.0 A |
| IP 23 |
|
| U2 = 100 V | I2 = 400 A | X 100 % | |