Miller Electric Auto Axcess 675 manual Rear Panel Receptacles And Supplementary Protectors

3-7. Rear Panel Receptacles And Supplementary Protectors

2

3

			1	1 115 V 10 A AC Receptacle RC2
5	4	6		Receptacle		supplies	60	Hz
				single-phase power. Maximum output
				from RC2 is limited by supplementary
				protector CB1 to 10 amps.
				2	Supplementary Protector CB1
				3	Supplementary Protector CB2
				CB1 protects 115 volt receptacle RC2
				from overload. If CB1 opens, RC2 does
				not work.
				CB2 protects the wirefeed motor from
				overload. If CB2 opens, the wirefeeder
				does not work.
				. Press button to reset breaker. If
					breaker continue to open, contact a
					Factory Authorized Service Agent.
				4	Wirefeed/Gas Receptacle RC8
				Use receptacle to connect gas and
				motor control cable to power source
				(see Sections 3-6and 8 for additional
				information).
				5	Peripheral Receptacle RC25
				Receptacle		provides connection		to
				touch sensor, water flow switch, jog +/−,

and I/O relay contacts circuitry (see Section 3-10).

6 Robot Interface Receptacle RC72

Use receptacle to connect robot input/output cable (see Sections 3-6and 8 for additional information).

Ref. 802 915-A

OM-201 540 Page 14