Schumacher SI-82-6 owner manual Before Returning for Repairs

Page 50

PROBLEM

POSSIBLE CAUSE

REASON/SOLUTION

Charger will not turn on

AC outlet is dead.

Check for open fuse or

when properly connected.

 

circuit breaker supplying AC

 

 

outlet.

 

Poor electrical connection.

Check power cord and

 

 

extension cord for loose

 

 

fitting plug.

The battery is connected

Clips are not making a good

Check for poor connection

and the charger is on, but is

connection.

at battery and frame. Make

not charging.

 

sure connecting points are

 

 

clean. Rock clips back and

 

 

forth for a better connection.

The measured current is

The charger reached the

No problem, this is a normal

much lower than what was

maximum voltage and is

condition.

selected.

reducing the current.

 

 

 

 

16.BEFORE RETURNING FOR REPAIRS

16.1When a charging problem arises, make certain that the battery is capable of accepting a normal charge. Double check all connections, AC outlet for the correct voltage, charger clips for correct polarity and the quality of the connections from the cables to the clips and from the clips to the battery system. The clips must be clean.

16.2When a battery is very cold, partially charged or sulfated, it will not draw the full rated amperes from the charger. It is both dangerous and damaging to a battery to force higher amperage into it than it can effectively use in recharging.

16.3When an UNKNOWN OPERATING PROBLEM arises, please read the complete manual and call the customer service number for information that will usually eliminate the need for return.

17. Specifications

Data Plate

 

120V, 50/60Hz

 

 

Model

SI-82-6MA

 

SI-70MA

SI-1275A

 

 

 

 

 

Single Phase Power Supply (Vac)

120

 

120

120

Frequency (Hz)

50/60

 

50/60

50/60

Charging Voltage(s) (V)

12

 

12/244

12

Starting Voltage(s) (V)

--

 

--

12

Effective Charging Current, Continuous (A)

2/61

 

10

2/121

Starting Current at 1.0 Volt (minimum) /

--

 

--

75

5

Cell (A)5

 

 

Max. Power Absorbed Charge/Start (KW)

0.143

 

.23/.43

.28/1.6

Dimensions (mm)

220 x 170 x

 

270 x 210 x

270 x 210 x

105

 

130

130

 

 

Weight (Kg)

3.8

 

6.5

7.5

Circuit Breaker Protected Output

Yes2

 

Yes2

Yes3

Circuit Breaker Rating (A)

12

 

20

35

• 46 •

 

 

 

 

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Advertencia Aviso Page Sección Página Seção PáginaTable of contents Advertencia Riesgo DE Descarga Eléctrica O DE Incendio Riego DE Gases ExplosivosPage Page Precauciones Para LA Conexión DE CC Page Amperímetro a Instrucciones DE ArmadoPanel DE Control Porcentaje de cargaArranque de motores de 75 a modelo SI-1275A únicamente AGMGEL Instrucciones DE Funcionamiento Información DE LA BateríaFinalización de la carga carga automática únicamente Modo de mantenimiento carga automática únicamente12. Cómo Calcular EL Tiempo DE Carga Instrucciones DE MantenimientoResolución DE Problemas Causa Posible MOTIVO/SOLUCIÓN Instrucciones DE Traslado Y AlmacenamientoProblema Causa Posible MOTIVO/SOLUCIÓN Problema Causa Posible MOTIVO/SOLUCIÓN Antes DE Regresar Para LAS Reparaciones Placa de datos 230V, 50/60Hz Modelo Page Perigo Aviso Risco DE Choque Elétrico OU Fogo Risco DE Gases ExplosivosPrecauções Pessoais Preparação Para CargaPrecauções Para Conexão CC Posição do CarregadorRisco DE Explosão E Contato COM O Ácido DA Bateria UMA Faísca Próxima DASiga Estas Etapas Quando a Bateria Estiver Fora do Veículo Painel DE Controle Aterramento e conexões do fio elétrico de CAInstruções DE Montagem Porcentagem de cargaInterruptor para a seleção do tipo de bateria Instruções DE Operação Informações Sobre a BateriaTérmino da operação de carga somente carga automática Modo Manter somente carga automáticaInstruções DE Manutenção 12. Cálculo do Tempo DE CargaTAMANHO/TAXAS DA Bateria Taxa DE CARGA/TEMPO DE Carga Instruções DE Transporte E ArmazenamentoSolução DE Problemas Possível Causa MOTIVO/SOLUÇÃO Problema Possível Causa MOTIVO/SOLUÇÃO Verifique se há uma conexão Modelo SI-82-6MA Antes DE Devolver O Produto Para ReparoEspecificações Placa de informações Placa de informações 230 V, 50/60 Hz Modelo Page Page Risk of Electric Shock or Fire Risk of Explosive GasesPage Charger Location Risk of Explosion Contact with Battery Acid DC Connection PrecautionsPage Control Panel Grounding and AC power cord connectionsAssembly Instructions Ammeter aBattery Type Switch Charge Rate Selector Switch Voltage/Amp SelectorBattery Information Operating InstructionsCompletion of Charge Automatic Charge Only Maintain Mode Automatic Charge OnlyUsing the Engine Start feature model SI-1275A only Calculating Charge Time Battery SIZE/RATING Charge RATE/CHARGING TimeMaintenance Instructions Moving and Storage InstructionsTroubleshooting Problem Possible Cause REASON/SOLUTION Problem Possible Cause REASON/SOLUTION Specifications Data Plate 120V, 50/60Hz Model SI-82-6MA Before Returning for RepairsData Plate 230V, 50/60Hz Model

SI-82-6 specifications

The Schumacher SI-82-6 is a highly regarded battery charger, renowned for its efficiency and versatility in charging various types of batteries. This device is particularly popular among automotive enthusiasts, mechanics, and anyone in need of reliable battery maintenance.

One of the standout features of the SI-82-6 is its ability to charge multiple battery types, including lead-acid, gel, AGM, and deep-cycle batteries. This versatility ensures that it can cater to a wide array of vehicles, from cars and trucks to boats and recreational vehicles. The charger operates with a robust voltage rating, typically providing a perfect balance between power and safety.

The Schumacher SI-82-6 utilizes advanced microprocessor technology, which optimizes the charging process. This means that the charger not only delivers the appropriate voltage and current to the battery but also intelligently adjusts its performance during the charging cycle. This feature helps in reducing the risk of overcharging, thereby prolonging the lifespan of the battery.

Another significant advantage of the SI-82-6 is its automatic shut-off function. Once the battery is fully charged, the charger will automatically turn off, preventing any potential damage or overheating. This is a critical safety feature, particularly for those who may leave the charger unattended while it operates.

The SI-82-6 is designed with user convenience in mind. It features an easy-to-read LED display that provides real-time information on the charging status, allowing users to monitor the progress at a glance. The compact and portable design also makes it easy to store and transport, ensuring that it can be used wherever needed.

Furthermore, the charger comes equipped with reverse polarity protection, which safeguards both the charger and the battery from potential damage caused by incorrect connections.

In summary, the Schumacher SI-82-6 is a powerful and intelligent battery charger that combines efficiency with comprehensive safety features. Its ability to charge various battery types, coupled with automatic shut-off and user-friendly design, makes it a must-have tool for anyone looking to maintain their batteries effectively. With its solid construction and reliability, the SI-82-6 is a staple choice for both casual users and professional mechanics alike. Whether you are preparing your vehicle for a long drive or simply maintaining a backup battery, the Schumacher SI-82-6 stands out as a dependable solution.
Top Page Image Contents