9.0 OPERATING INSTRUCTIONS
9.9 ALARM HISTORY
Alarm History displays each of the Alarm messages for the last 15 Alarms experienced by the machine. It also gives access to displaying the machine operating conditions that existed at the time of each Alarm. The first one shown, “Alarm History 1”, was the most recent Alarm to occur. Note that multiple, consecutive EMERGENCY STOP Alarms are not recorded as separate Alarms, only the first one will be shown.
Each of the last 15 Alarm messages can be seen by moving the Alarm History list up and down using the arrow buttons. Pressing the SELECT button when one of the Alarms is highlighted will display the list of machine values that existed at the time that particular Alarm occurred.
The name and value of each of the items can be seen by moving the list up and down using the arrow buttons. Pressing the ALARM HIST. button will return the display to the ALARM HISTORY screen.
100PSI
READY TO START
−ALARM HISTORY−
ALARM HISTORY 1 BLOWER MOTOR OVERLOAD ALARM HISTORY 2 HIGH AIREND DISCH TEMP
Alarm histories can be exited by pressing either the STATUS or MAIN MENU buttons. If no buttons are pressed within 30 seconds, the display will return to the CURRENT STATUS screen.
STATUS | MAIN MENU | SELECT |
|
|
|
9.10 CLOCK FUNCTIONS
|
|
|
|
|
|
|
| 100 | PSI |
|
|
|
|
|
|
|
| −CLOCK FUNCTIONS− | ||
| READY TO START |
| ||||
|
|
|
| Time | ||
|
|
|
|
| 01:15 | |
|
|
|
|
|
| Date |
|
|
|
|
| Jan 01, 00 | |
STATUS |
| MAIN MENU |
| SELECT | ||
|
|
|
|
|
|
|
The date and time for the real time clock is set through the CLOCK FUNCTIONS screen. Use the up and down arrows to highlight either TIME or DATE. Select the highlighted setting by pressing SELECT.
If TIME is selected, first the hours will be highlighted. Adjust the hours (00−23 hour clock) by using the up and down arrows. Once the correct time is in the display, press SET to highlight the minutes. Adjust the minutes (00−59) and then press SET to complete setting the time.
If DATE is selected, first the month will be highlighted. Adjust the month by using the up and down arrows and then press SET to highlight the date. Once the correct date is displayed, press SET to highlight the year. Once the correct year is displayed, press SET to complete setting the date.
IRN37 - 160K - CC & IRN50 - 200H & IRN75 - 160K - 2S & IRN - 100 - 200H - 2S & IRN 250 - 300H - 2S | 75 | |
http://air.irco.com | ||
|