Black & Decker BDCDHP220 Drill Safety Warnings, Tools that have the switch on invites accidents

Page 4

tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Battery tool use and care

a)Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b)Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c)When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d)Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Drill Safety Warnings

•Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

•Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

•Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

•When not in use, place tool on its side on a stable surface where it will not cause a

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents BDCDHP220 20v Max* 1/2 Lithium Drill / DriverPage Work Area Safety Save all warnings and instructions for future referenceTools that have the switch on invites accidents Drill Safety WarningsService Symbols Important Safety Instructions for Battery Chargers Wire Size AWGCharging Procedure Leaving the battery in the chargerCharge the battery packs only in Black & Decker chargers Storage RecommendationsSafety Warnings and Instructions Drills Installing and Removing the Battery Pack From the ToolTrigger Switch & Forward/Reverse Button Figure D Adjusting Torque Control Figure EDual Range Switch Figure F Keyless Chuck Figure GScrew Driving DrillingTroubleshooting Service InformationLimited Two-Year Home Use Warranty Page La position de marche risque de provoquer un accident Avertissements de sécurité de la perceuse SymbolesUtilisation sécuritaire de l’outil électrique Calibre de fil minimum recommandé pour les rallonges Utiliser une protection oculaire adéquateUtiliser une protection auditive adéquate Longueur totale de la rallongeConserver CES Directives Directives de sécurité importantes pour les blocs-piles Lire toutes les directivesBloc-piles laissé dans le chargeur Avertissement de sécurité et directives perceusesProcédure de charge Remarques importantes pour le chargementCommande de réglage du couple Figure E Avertissements de sécurité et directives perceusesInsertion et retrait du bloc-piles de l’outil Détente et bouton de marche avant/marche arrière Figure DMode tournevis Mode perçageMandrin auto-serrant Figure G Perçage du boisLe sceau Rbrcmc Rangement des mècheEntretien Accessoires EntretienPautas DE SEGURIDAD/DEFINICIONES Page Advertencias de seguridad para el taladro SímbolosVoltios Amperios Hertz Vatios Minutos Corriente alterna Corriente directaDescripción DE LA Funciones Figura a Tamaño AWG del conductorConserve Estas Instrucciones Interruptor disparador y botón de avance/reversa Figura D Instrucciones de operaciónRecomendaciones con respecto al almacenamiento Ajuste del control de torsión Figura E Engranaje de doble alcance Figura FPortabrocas sin llave Figura G DestornilladoTaladrado en madera Taladrado en metalTaladrado en mampostería Luz de trabajo de LEDDetección de problemas Problema Causa posible Solución posibleMaximizar la vida útil del Paquete de baterías, esteICES-003 canadiense Años DE Garantia Grupo Realsa en herramientas, S.A. de C.V Ferre Pat de Puebla, S.A. de C.VServicio de Fabrica Black & Decker, S.A. de C.V Representaciones Industriales Robles, S.A. de C.V

BDCDHP220 specifications

The Black & Decker BDCDHP220 is a versatile and powerful cordless drill that stands out in the entry-level toolkit segment. It is designed to meet the needs of both DIY enthusiasts and professionals, offering a combination of performance, durability, and user-friendly features.

One of the main highlights of the BDCDHP220 is its 20V lithium-ion battery, which provides ample power and a fade-free performance for extended use. The inclusion of a lithium-ion battery means users benefit from a lightweight tool that does not suffer from memory effect, allowing for quick recharges and minimal downtime. The rechargeable battery is compatible with other Black & Decker 20V tools, adding to the convenience and versatility of the system.

The BDCDHP220 features a compact and lightweight design, making it easy to maneuver in tight spaces and overhead applications. Weighing in at just a few pounds, it allows users to work for longer periods of time without experiencing significant fatigue. The ergonomic handle offers a comfortable grip, which is essential for maintaining control during extended tasks.

This drill also offers a two-speed transmission, allowing users to toggle between 0-450 RPM for softer materials or 0-1500 RPM for tougher materials. The variable speed control enhances the user’s ability to tackle a range of tasks from drilling to driving screws efficiently. The built-in high-performance motor delivers fantastic torque levels, making it suitable for heavy-duty tasks.

Another notable feature of the BDCDHP220 is its 1/2 inch keyless chuck, which allows for easy and quick bit changes. This feature provides users with the flexibility to switch between drill bits and other attachments without needing additional tools, streamlining the workflow.

Additionally, the integrated LED work light illuminates dark working environments, providing visibility when it’s needed most. This practical feature enhances safety and accuracy during drilling tasks, particularly in tight or poorly lit spaces.

In summary, the Black & Decker BDCDHP220 is an excellent cordless drill option that combines power, efficiency, and ease of use. With its robust battery, lightweight design, variable speed settings, and convenient features, it meets the demands of various drilling and fastening applications, making it a great addition to any toolbox.
Top Page Image Contents