Black & Decker BDCDHP220 instruction manual Safety Warnings and Instructions Drills

Page 8

whenever you desire with no adverse affect on the battery pack.

5.Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6.Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

Safety Warnings and Instructions: Drills

WARNING: Before using tool, read all instructions and cautionary markings on tool.

WARNING: Drill may stall (if overloaded or improperly used) causing a twist. Always expect the stall. Grip the drill firmly with two hands to control the twisting action and prevent loss of control which could cause personal injury. If a stall does occur, release the trigger immediately and determine the reason for the stall before re-starting.

FUNCTIONAL DESCRIPTION

 

 

Figure A

5.

Keyless Chuck

1.

Trigger Switch

6.

Battery

2.

Forward/Reverse Button

7.

Battery Release Button

3.

Torque Adjust Collar

8.

LED Work Light

4.

Dual Range Gear Selector

9.

Bit Tip Holder

Operating Instructions

Installing and Removing the Battery Pack From the Tool

CAUTION: Make certain the lock-off button is engaged to prevent switch actuation before removing or installing battery.

To install battery pack: Insert battery pack (6) firmly into tool until an audible click is heard as shown in Figure B. Ensure battery pack is fully seated and fully latched into position.

To remove battery pack: Depress the battery release button (7) as shown in Figure C and pull battery pack out of tool.

Trigger Switch & Forward/Reverse Button - Figure D

•The drill is turned ON and OFF by pulling and releasing the trigger switch (1) shown in

Figure D. The farther the trigger is depressed, the higher the speed of the drill.

•A forward/reverse control button (2) determines the rotational direction of the tool and also serves as a lock off button.

•To select forward rotation, release the trigger switch and depress the forward/reverse control button on the right side of the tool.

•To select reverse, depress the forward/reverse control button on the left side of the tool.

•The center position of the control button locks the tool in the off position. When changing the position of the control button, be sure the trigger is released.

Adjusting Torque Control - Figure E

This tool is fitted with a torque adjustment collar (3) to select the operating mode and to set the torque for tightening screws. Large screws and hard workpiece materials require a higher torque setting than small screws and soft workpiece materials.

•For drilling in wood, metal and plastics, set the collar to the drilling position symbol

•For screwdriving, set the collar to the desired setting. If you do not yet know the appropriate setting, proceed as follows:

•Set the collar to the lowest torque setting.

•Tighten the first screw.

•If the clutch ratchets before the desired result is achieved, increase the collar setting and continue tightening the screw. Repeat until you reach the correct setting. Use this setting for the remaining screws.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BDCDHP220 20v Max* 1/2 Lithium Drill / DriverPage Work Area Safety Save all warnings and instructions for future referenceService Drill Safety WarningsTools that have the switch on invites accidents Symbols Important Safety Instructions for Battery Chargers Wire Size AWGCharging Procedure Leaving the battery in the chargerCharge the battery packs only in Black & Decker chargers Storage RecommendationsSafety Warnings and Instructions Drills Installing and Removing the Battery Pack From the ToolTrigger Switch & Forward/Reverse Button Figure D Adjusting Torque Control Figure EDual Range Switch Figure F Keyless Chuck Figure GScrew Driving DrillingTroubleshooting Service InformationLimited Two-Year Home Use Warranty Page La position de marche risque de provoquer un accident Utilisation sécuritaire de l’outil électrique SymbolesAvertissements de sécurité de la perceuse Calibre de fil minimum recommandé pour les rallonges Utiliser une protection oculaire adéquateUtiliser une protection auditive adéquate Longueur totale de la rallongeConserver CES Directives Directives de sécurité importantes pour les blocs-piles Lire toutes les directivesBloc-piles laissé dans le chargeur Avertissement de sécurité et directives perceusesProcédure de charge Remarques importantes pour le chargementCommande de réglage du couple Figure E Avertissements de sécurité et directives perceusesInsertion et retrait du bloc-piles de l’outil Détente et bouton de marche avant/marche arrière Figure DMode tournevis Mode perçageMandrin auto-serrant Figure G Perçage du boisEntretien Rangement des mècheLe sceau Rbrcmc Accessoires EntretienPautas DE SEGURIDAD/DEFINICIONES Page Advertencias de seguridad para el taladro SímbolosVoltios Amperios Hertz Vatios Minutos Corriente alterna Corriente directaDescripción DE LA Funciones Figura a Tamaño AWG del conductorConserve Estas Instrucciones Recomendaciones con respecto al almacenamiento Instrucciones de operaciónInterruptor disparador y botón de avance/reversa Figura D Ajuste del control de torsión Figura E Engranaje de doble alcance Figura FPortabrocas sin llave Figura G DestornilladoTaladrado en madera Taladrado en metalTaladrado en mampostería Luz de trabajo de LEDDetección de problemas Problema Causa posible Solución posibleMaximizar la vida útil del Paquete de baterías, esteICES-003 canadiense Años DE Garantia Grupo Realsa en herramientas, S.A. de C.V Ferre Pat de Puebla, S.A. de C.VServicio de Fabrica Black & Decker, S.A. de C.V Representaciones Industriales Robles, S.A. de C.V

BDCDHP220 specifications

The Black & Decker BDCDHP220 is a versatile and powerful cordless drill that stands out in the entry-level toolkit segment. It is designed to meet the needs of both DIY enthusiasts and professionals, offering a combination of performance, durability, and user-friendly features.

One of the main highlights of the BDCDHP220 is its 20V lithium-ion battery, which provides ample power and a fade-free performance for extended use. The inclusion of a lithium-ion battery means users benefit from a lightweight tool that does not suffer from memory effect, allowing for quick recharges and minimal downtime. The rechargeable battery is compatible with other Black & Decker 20V tools, adding to the convenience and versatility of the system.

The BDCDHP220 features a compact and lightweight design, making it easy to maneuver in tight spaces and overhead applications. Weighing in at just a few pounds, it allows users to work for longer periods of time without experiencing significant fatigue. The ergonomic handle offers a comfortable grip, which is essential for maintaining control during extended tasks.

This drill also offers a two-speed transmission, allowing users to toggle between 0-450 RPM for softer materials or 0-1500 RPM for tougher materials. The variable speed control enhances the user’s ability to tackle a range of tasks from drilling to driving screws efficiently. The built-in high-performance motor delivers fantastic torque levels, making it suitable for heavy-duty tasks.

Another notable feature of the BDCDHP220 is its 1/2 inch keyless chuck, which allows for easy and quick bit changes. This feature provides users with the flexibility to switch between drill bits and other attachments without needing additional tools, streamlining the workflow.

Additionally, the integrated LED work light illuminates dark working environments, providing visibility when it’s needed most. This practical feature enhances safety and accuracy during drilling tasks, particularly in tight or poorly lit spaces.

In summary, the Black & Decker BDCDHP220 is an excellent cordless drill option that combines power, efficiency, and ease of use. With its robust battery, lightweight design, variable speed settings, and convenient features, it meets the demands of various drilling and fastening applications, making it a great addition to any toolbox.
Top Page Image Contents