Black & Decker BDCDHP220 Storage Recommendations, Charging Procedure, Important Charging Notes

Page 7

Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

Charge the battery packs only in Black & Decker chargers.

DO NOT splash or immerse in water or other liquids. This may cause premature cell failure.

Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40˚C) (such as outside sheds or metal buildings in summer).

WARNING: Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service center for recycling.

WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.

Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. NOTE:

Lithium-Ion batteries should not be put in checked baggage.

Storage Recommendations

1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold.

2. Long storage will not harm the battery pack or charger.

Charging Procedure

Black & Decker chargers are designed to charge

Black & Decker battery packs in 3.5-4 hours depending on the pack being charged.

1.Plug the charger into an appropriate outlet before inserting the battery pack.

2.Insert the battery pack into the charger.

3.The green LED will flash indicating that the battery is being charged.

4.The completion of charge is indicated by the green LED remaining on continuously. The pack is fully charged and may be used at this time or left on the charger.

Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. For longest battery life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use.

Leaving the battery in the charger

The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

Important Charging Notes

1.Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below +40°F (+4.5°C), or above +105°F (+40.5°C). This is important and will prevent serious damage to the battery pack.

2.The charger and battery pack may become warm to touch while charging. This

is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3.If the battery pack does not charge properly:

a.Check current at receptacle by plugging in a lamp or other appliance

b.Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c.Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d.If charging problems persist, take the tool, battery pack and charger to your local service center.

4.The battery pack should be recharged when it fails to produce sufficient power

on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack

7

Image 7
Contents 20v Max* 1/2 Lithium Drill / Driver BDCDHP220Page Save all warnings and instructions for future reference Work Area SafetyTools that have the switch on invites accidents Drill Safety WarningsService Symbols Wire Size AWG Important Safety Instructions for Battery ChargersStorage Recommendations Charging ProcedureLeaving the battery in the charger Charge the battery packs only in Black & Decker chargersAdjusting Torque Control Figure E Safety Warnings and Instructions DrillsInstalling and Removing the Battery Pack From the Tool Trigger Switch & Forward/Reverse Button Figure DDrilling Dual Range Switch Figure FKeyless Chuck Figure G Screw DrivingService Information TroubleshootingLimited Two-Year Home Use Warranty Page La position de marche risque de provoquer un accident Avertissements de sécurité de la perceuse SymbolesUtilisation sécuritaire de l’outil électrique Longueur totale de la rallonge Calibre de fil minimum recommandé pour les rallongesUtiliser une protection oculaire adéquate Utiliser une protection auditive adéquateConserver CES Directives Lire toutes les directives Directives de sécurité importantes pour les blocs-pilesRemarques importantes pour le chargement Bloc-piles laissé dans le chargeurAvertissement de sécurité et directives perceuses Procédure de chargeDétente et bouton de marche avant/marche arrière Figure D Commande de réglage du couple Figure EAvertissements de sécurité et directives perceuses Insertion et retrait du bloc-piles de l’outilPerçage du bois Mode tournevisMode perçage Mandrin auto-serrant Figure GLe sceau Rbrcmc Rangement des mècheEntretien Entretien AccessoiresPautas DE SEGURIDAD/DEFINICIONES Page Minutos Corriente alterna Corriente directa Advertencias de seguridad para el taladroSímbolos Voltios Amperios Hertz VatiosTamaño AWG del conductor Descripción DE LA Funciones Figura aConserve Estas Instrucciones Interruptor disparador y botón de avance/reversa Figura D Instrucciones de operaciónRecomendaciones con respecto al almacenamiento Destornillado Ajuste del control de torsión Figura EEngranaje de doble alcance Figura F Portabrocas sin llave Figura GLuz de trabajo de LED Taladrado en maderaTaladrado en metal Taladrado en mamposteríaPaquete de baterías, este Detección de problemasProblema Causa posible Solución posible Maximizar la vida útil delICES-003 canadiense Años DE Garantia Representaciones Industriales Robles, S.A. de C.V Grupo Realsa en herramientas, S.A. de C.VFerre Pat de Puebla, S.A. de C.V Servicio de Fabrica Black & Decker, S.A. de C.V

BDCDHP220 specifications

The Black & Decker BDCDHP220 is a versatile and powerful cordless drill that stands out in the entry-level toolkit segment. It is designed to meet the needs of both DIY enthusiasts and professionals, offering a combination of performance, durability, and user-friendly features.

One of the main highlights of the BDCDHP220 is its 20V lithium-ion battery, which provides ample power and a fade-free performance for extended use. The inclusion of a lithium-ion battery means users benefit from a lightweight tool that does not suffer from memory effect, allowing for quick recharges and minimal downtime. The rechargeable battery is compatible with other Black & Decker 20V tools, adding to the convenience and versatility of the system.

The BDCDHP220 features a compact and lightweight design, making it easy to maneuver in tight spaces and overhead applications. Weighing in at just a few pounds, it allows users to work for longer periods of time without experiencing significant fatigue. The ergonomic handle offers a comfortable grip, which is essential for maintaining control during extended tasks.

This drill also offers a two-speed transmission, allowing users to toggle between 0-450 RPM for softer materials or 0-1500 RPM for tougher materials. The variable speed control enhances the user’s ability to tackle a range of tasks from drilling to driving screws efficiently. The built-in high-performance motor delivers fantastic torque levels, making it suitable for heavy-duty tasks.

Another notable feature of the BDCDHP220 is its 1/2 inch keyless chuck, which allows for easy and quick bit changes. This feature provides users with the flexibility to switch between drill bits and other attachments without needing additional tools, streamlining the workflow.

Additionally, the integrated LED work light illuminates dark working environments, providing visibility when it’s needed most. This practical feature enhances safety and accuracy during drilling tasks, particularly in tight or poorly lit spaces.

In summary, the Black & Decker BDCDHP220 is an excellent cordless drill option that combines power, efficiency, and ease of use. With its robust battery, lightweight design, variable speed settings, and convenient features, it meets the demands of various drilling and fastening applications, making it a great addition to any toolbox.