HP RISS Components manual Firewall Settings, SSL Configuration, Firewall ports

Firewall Settings

The Firewall Settings view shows the firewall settings for the PCC server and the RISS HTTP portals, and their virtual IP (VIP) addresses.

It includes the following information:

Table 19 Firewall ports

Feature	Description
Virtual IP	The virtual IP address.
Port	The port number.
Service	The service running on the port.
Type	The transfer protocol used on the port: TCP or UDP
Inbound/Outbound	Shows if the firewall is enabled or disabled on the port’s inbound
	and outbound traffic. Outbound traffic is not filtered on the PCC server
	ports.
Table 20 Link to Firewall Settings view
Origin	Link
left menu	Configuration > Firewall Settings

SSL Configuration

SSL, or Secure Socket Layer, is a technology that allows web browsers and web servers to communicate over a secured connection. This means that the data being sent is encrypted by one side, transmitted, then decrypted by the other side before processing. It is a two-way process, meaning that both the server AND the browser encrypt all traffic before sending out data.

The SSL Configuration view lets you generate certificate signing requests (CSRs), and corresponding private keys, for secured connections on the RISS. You can create two types of CSRs: one for access to the PCC portal, and one for access to the HTTP portals.

After generating the CSRs, see "Installing a third party certificate on the PCC portal" on page 40 and "Installing a third party certificate on the HTTP portals" on page 40 for the steps needed to complete the process.

The SSL Configuration view contains two areas. The top area shows any current certificate signing requests in the system. The bottom area contains a form to complete to generate a certificate signing request (CSR) and RSA private key.

Table 21 Link to SSL Configuration view

Origin	Link
left menu	Configuration > SSL Configuration

38 Configuration