HP RISS Components manual Mapping advanced options, Mapping information

Figure 7 Mapping information

5.Complete the form by entering the following:

•LDAP Domain name: Domain to which the users belong. For example: ldaptest.com.

•LDAP Starting Point: Root node where the user accounts are stored. Example:

For Exchange, enter cn=Users,dc=ldaptest,dc=com for node Users in domain ldaptest.com. The value must specify the relative location in the LDAP tree, including parent nodes and domain name. (Another example is ou=stest,dc=sandbox2k_12,dc=com where ou is the organization name in the exchange.)

•RISS DomainID: The RISS domain ID (not the domain name) where users are synchronized with users on the LDAP server. This is the same as the domainID set in Domain.jcml.

•Deletion Starting Point: The root node where deleted user objects are stored on the LDAP server.

Example: For Exchange, enter cn=deletedObjects,dc=ldaptest,dc=com for node deletedObjects in domain ldaptest.com. The value must specify the relative location in the LDAP tree, including parent nodes and domain name.

6.The console displays “Do you want to attach the job to an HTTP portal” and a “Back to main page” button.

To complete the advanced options, see "Mapping advanced options" on page 45.

Mapping advanced options

Click the Advanced Options icon () to display the advanced options.

Figure 8 Advanced options

1.Complete the advanced options form by entering the following information:

• Group Name: Not used at this time.

Administrator Guide 45