HP Pay per use (PPU) specs

Question

If transport of the URS Usage Reports is through email:

a.Hostname and domain name of Internet mail relay host:

b.What is the masqueraded domain to create the “Return address” for the emails?

c.Does the Internet mail relay specified in (a) accept to send emails coming from the Utility Meter under account “umeter”?

d.Is the SMTP AUTH protocol implemented on the Internet mail relay specified in (a)?

e.Is Transaction Layer Security (TLS) implemented on the Internet mail relay specified in (a)?

If the transport of URS Usage Reports is through https:

a.TCP port 443 has to be open in the firewall of the customer for traffic from the Utility Meter to HP. Is this port opened?

If a proxy server is used to relay data to the outside world:

b.hostname and domain name of the proxy server

c.proxy server port number

d.username/password to cross the proxy server (*)

Answer

c.Yes / No

d.Yes / No

e.Yes / No

a.Yes / No

(*): For security reasons, this information can be made available at the time of installation only.

NOTE:

1.If the Utility Meter is equipped with an iLO (integrated Lights Out) board, please hook it up to networking, configure access to it and have the username/password to access it available during installation.

2.The configuration of the Utility Meter software requires a graphical console. This can be provided by:

•An optional VGA card installed in the Utility Meter server (you will need a USB mouse and keyboard). If you do not hook up this screen to a KVM switch, you need to request physical access to the Data Center where the Utility Meter is located.

•An optional iLO/iLO2 board with an ‘Advanced’ License and a system with a web browser

•A PC or workstation with an X-Windows emulator or true X11 capability that can remotely access the Utility Meter

B.1 Networking Details for the Command View XP AE Server

Please fill out the table below if the customer is using Command View XP Advanced Edition instances. If multiple Command View XP Advanced Edition instances are in use, please duplicate this page and complete one table per instance.

Table B-2 Networking Details for the Command View XP AE Server

Question

Answer

IP address of the server running Command View XP Advanced

Edition 6.0 that is controlling one or more disk arrays under a

URS contract:

Username/password of an account in the above Command View

XP Advanced Edition instance with “Modify” privileges (*):

(*): For security reasons, this information can be made available at the time of installation only.

NOTE: The CIM/WBEM service in CV XP AE is not needed.

98 Site Preparation Form for Utility Ready Storage