HP StudioJet, FlexJet E manual Safety & Cautions

The Ioline FlexJet E and StudioJet printers have many fast moving components. Please read and follow these safety guidelines before beginning operation of the printer:

nDo not try to repair the machine without factory authoriza- tion. Only qualified service personnel should attempt any disassembly or access to internal components. If external mechanical adjustments are necessary, turn off the printer and disconnect it from all power sources (both the computer and the wall outlet).

nBe careful with hair, jewelry, or loose clothing near the printer. They can become caught in the mechanical parts.

nNever attempt to move the carriage by hand when the power is on. Always use the Arrow keys to move the carriage. To park the carriage safely in

the Service Station and protect the print cartridges, press the Clean button.

SAFETY & CAUTIONS

nKeep hands away from the carriage when the printer is in operation. The car- riage will automati- cally move to touch the left end plate then back to the right end (the Service Station position) when the power is turned on.

Figure 1. Hold the bottom surfaces of the end covers to avoid injury to your fingers.

nNever insert hands or other objects into the Service Station area on the right side of the printer. The carriage occasionally enters this area without warning and could collide with an obstruction, potentially causing and injury.

nBe careful when moving or lifting the printer. Moving the FlexJet E printer requires at least 2 people. To avoid injury to your fingers, do not lift either model by the end plates. Hold the bottom surfaces of the end covers to lift or move them. See Figure 1.

nKeep fingers away from the drive shaft when the printer is in

ix