loading media
6To load fan±folded media, proceed as follows:
a.Place the media supply either behind or beneath the printer, as shown.
Make sure the media feeds freely from the container.
b.Route the media through the rear media loading slot.
c.Continue with step 7.
7Route the media over the guide plate, under the media sensor and over the platen roller (located beneath the printhead).
Media Hub | Media |
Assembly | Retainer |
Hinge | Media Edge | Media |
Plate | Sensor | Guide |
| Adjust | Fanfold Media |
|
|
8Rotate the media guide up, and slide it to the edge of the media.
9Continue feeding the media under the printhead until the media exits the printhead assembly.
Slide the media forward, until it extends beyond the printer front slot. Ensure that all media guides are adjusted to the width of stock being used.
8 | Operator's Guide |