Slctin Mia Hanlin
The options for this selection are as follows:
•SELF STRIP ± selects the self strip option.
When the label present sensor is installed and enabled, the printer can be configured for ªone upº printing.
•CUTTER selects the cutter mechanism option.
The cutter must be installed to use this option.
•TEAR OFF ±selects the tear off option.
•CONTINUOUS ± selects the continuous feed option.
1Press ON LINE/PAUSE to place the printer in the off line mode.
2Press 
to enter the configuration menus.
3Press 
to reach the printer control menu.
4Press 
to enter the printer control menu.
OFFLINE
IGP/PGL
USER CONFIG PAPER CONTROL
USER CONFIG PRINTER CONTROL
PRINTER CONTROL Media Handling
26 | Operator's Guide |