fault messages
PAPER JAM
PAPER EMPTY
MEDIA FAULT
CUTTER FAULT
RIBBON SAVER FAULT
PRINTHEAD
TEST FAIL
Paper Jam
Possible causes:
•Improper media.
•Actual label length greater than programmed label length.
Paper Empty
Printer is out of media stock.
Media Fault
The ribbon system detected a fault. Possible causes:
•Out of ribbon.
•Ribbon motion was stopped.
•Obstructions in the media movement.
•Paper motion stopped.
Cutter Fault
The cutter operation failed.
Possible causes:
•Cutter is jammed.
•Defective cutter hardware.
Ribbon Saver Fault
Ribbon saver operation failed.
Possible causes:
•Obstruction in ribbon area.
•Defective ribbon saver hardware.
Printhead Test Fail
The printer has detected a failure in one or more printhead dots.
32 | Operator's Guide |