HP T3204 manual Noe

loading media

f.Pull the head leveling knob outward, and rotate it one detent. Rotating the

knob clockwise from position 1 will adjust the printer for media that is narrower than the maximum width accepted by the printer. When the head leveling knob is rotated clockwise from the detent position just before position 1 to position 1, the printhead will return to the maximum media width position.

Head Leveling Knob

no￿e

Each of the 18 positions on the head leveling knob will raise or lower the printhead 0.003 inches (0.076 mm), giving a maximum adjustment range of 0.054 inches (1.37 mm).

g.Return to step a and repeat until you obtain the desired print quality.

12If you do not intend to use the optional media rewind hub, skip the next step and go on to step 14.

no￿e

Use the rewind hub to print quantities of labels in single batches, for later use. The hub automatically rolls up the label media for convenient handling. It is also used with the automatic label peel-off dispenser option to roll up the media backing after labels have been peeled off.

10 Operator's Guide